FujiFilm PROFECT CS Service Manual page 357

10.20.2 Check Procedures via LEDs on the SNS Board (16)
1.
Perform the procedures for starting the LED check.
{MT:10.3.1_Procedures for Starting the LED Check}
2.
Allow the hold release arm to move, and check the display on the LED
of the SNS17B board.
l GOOD indication
The LED changes its status (lit to unlit or unlit to lit) when the hold release arm is
moved.
l NO GOOD indication
The LED does not change.
3.
Perform the procedures for exiting the LED check.
{MT:10.3.2_Procedures for Exiting the LED Check}
011-202-04
11.15.2004 FM4425
CR-IR 363 Service Manual
MT-200
MT-200