FujiFilm PROFECT CS Service Manual page 900

5.
Make sure that "RESULT-OK" appears on screen.
6.
Using menus "TEST", "Image Format-1" or "Image Format-2", and
"SINGLE", read one of the IPs prepared in step 1, and generate an
image output.
u INSTRUCTION u
Be sure to follow the instruction mentioned in "20.2 Image/Conveyance Checks"
when outputting the image.
{MC:20.2_Image/Conveyance Checks}
7.
Verify that the white blank portion reaches the value so adjusted.
8.
Back up the data so adjusted into a floppy diskette.
{MC:19.1_Backing Up the Scanner Data}
011-202-11E
06.29.2012 FM6046
CR-IR 363 Service Manual
MC-411
MC-411