FujiFilm PROFECT CS Service Manual page 277

5.15 Error Code Analysis Flow: Scanner 15
10294, 11273, 12222, 12273, 12283, 12284, 13284
n Analysis Flow
m Check the error log in the ERROR DB.
Q1
Errors 10230-10236 logged?
Y
Check the error code table again and troubleshoot.
N
{MT:2._Error Code Table}
A
Q2
Scanner machine-specific data correctly installed onto the CPU91A board?
N
Restore the scanner machine-specific data (SCN ALL DATA) attached to the
Y
machine.
{MC:23.2_Restore Procedure}
Q3
Check the voltage of the SCN17A/SCT17B board test pin (CN5).
{MT:8._Procedures for Checking the Voltage}
Q4
Error recurs?
N
A
Y
Q5
IMG17A/B, CPU91A, and SCN17A/SCT17B boards tested in MUTL normal?
{MT:18._Board Test in MUTL}
N
Q8
Y
Q6
Check the laser (LDD).
{MT:13._Procedures for Checking the Scanner I/O}
Q7
011-202-04
11.15.2004 FM4425
Q7
Error recurs?
N
A
Y
m Replace the boards in the order named.
1. SCN17A/SCT17B board
{MC:13.4_Scanner Board}
2. IMG17A/B Board
{MC:13.3_IMG17A/B Board}
3. Scanning optics unit
{MC:10._Scanning Optics Unit}
4. CPU91A board
{MC:13.2_CPU91A Board}
Q8
Reseat the error-causing board and check if the error occurs again.
N
A
Y
m Replace the error-causing board.
{MC:13.2_CPU91A Board}
{MC:13.3_IMG17A/B Board}
{MC:13.4_Scanner Board}
CR-IR 363 Service Manual
MT-120
MT-120