FujiFilm PROFECT CS Service Manual page 189

Error
Error Name
Code
12148 Image frame clock timeout
Image processing pixel clock
12149
excess error
Image processing pixel clock
12150
shortage error
Image processing line clock
12151
excess error
Image processing line clock
12152
shortage error
Image processing frame clock
12153
error
12154 Image processing overrun error
12164 FIFO data count shortage error
12165 FIFO data count excess error
12201 Start-point detection error
011-202-11E
06.29.2012 FM6046
During routine processing, a timeout of the frame clock lock (information indicative of the leading edge of the image
data) sent from the SCN17A/SCT17B board is detected by the sub-CPU. (30 seconds)
An error is detected for the pixel clock from the sub-CPU of the IMG17A/IMG17B board to the SCN17A/SCT17B
board.
- The pixel clock that is larger than the parameter value is detected.
- The pixel clock, which is part of image data, denotes the number of pixels for one line of image data.
During routine processing, when the image data from the SCN17A/SCT17B board is processed, an insufficient
number of pixels for a certain line is detected by the sub-CPU.
During routine processing, when the image data from the SCN17A/SCT17B board is processed, an excess number
of lines is detected.
During routine processing, when the image data from the SCN17A/SCT17B board is processed, an insufficient
number of lines is detected, or even when five seconds have passed after the trailing edge of a certain line clock,
the trailing edge of its subsequent line clock is not detected.
During routine processing, when an image processing command is accepted from the SCN17A/SCT17B board to
the sub-CPU, the sub-CPU has already received the frame clock from the SCN.
During routine processing, the main CPU loses some of the image data from the sub-CPU.
During routine processing, the sub-CPU completes its processing normally, but the number of pixels received by the
main CPU via the FIFO is insufficient.
During routine processing, the sub-CPU completes its processing normally, but the number of pixels received by the
main CPU via FIFO is excessive.
During bootup, error for the start-point detection signal (SSH, SSL) is detected.
Occurrence Condition
CR-IR 363 Service Manual
MT-32
Analysis
Flow
{MT:6.1}
{MT:6.1}
{MT:6.1}
{MT:6.1}
{MT:6.1}
{MT:6.1}
{MT:18.}
{MT:18.}
{MT:18.}
{MT:5.10}
MT-32