Setting The Origin Point - GRAPHTEC CE5000-120AP User Manual

Setting the ORIGIN POINT

If the HP-GL command mode is set, the origin point can be set to the lower left or
center. The default setting is the lower left, so change this setting if your application
specifies a different origin position.
(1) Set the command setting to "HP-GL."
C O M M A N D
(2) Press the (ENTER) key to display the origin-point setting.
O R I G I N P T
(3) Press the or
then press the
(NEXT) or (PREV.) key.
(4) Press the (PAUSE) key to cancel PAUSE mode.
H P - G L
L . L .
key to select "L.L." (LOWER LEFT) or "CENTER," and
(ENTER) key to confirm. To cancel the selection, press the
Function Settings and Operations
4-33