Table of Contents
Advertisement
1
INTRODUCTION
This plotter incorporates a digital servo drive to perform cutting and plotting operations at high speed and
high precision.
Besides being used to cut marking film and other media, this plotter can also be used as a pen plotter.
1.1
Main Specifications
Item
Configuration
Effective cutting area
Media hold-down method
Loadable media width
Maximum operating speed
Settable speeds
Cutting force
Minimum character size
Mechanical resolution
Programmable resolution
Distance accuracy*
2
Perpendicularity
Repeatability
Registration mark reading precision*
Number of tools
Blade type
Pen types
Cutting media
Interfaces
Buffer size
Command sets
LCD panel
Rated power supply
Power consumption
Operating environment
External dimensions (WxDxH)
Weight (without stand)
1
*
HP-GL is a registered trademark of Hewlett-Packard Company.
2
*
When Graphtec-specified media and conditions are used.
3
*
When the pen provided as a standard accessory is used with Graphtec-specified plotting paper;. the accuracy of
reading the patterns provided with these plotters
4
*
When the CB15U or CB15U-K30 cutter blade is used.
5
*
When the CB15U-K30 cutter blade is used.
6
*
When the CB15UA cutter blade is used.
FC4500-UM-251-9370
FC4500-50
Flatbed
590 × 430 mm
Electrostatic adhesion Adhesive mat/Application sheet
500 mm
75 cm/s
<FC4500/FC4550>
Tool holder 1:1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60,65, 70, 75 cm/s
Tool holder 2:1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 15, 20, 25, 30 cm/s
<FC4510>
1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60,65, 70, 75 cm/s
Tool holder 1: 0.10 to 5.88 N (10 to 600 gf)
Tool holder 2: 0.10 to 2.94 N (10 to 300 gf)
Approximately 5 mm for alphanumeric characters (varies depending on the media and fonts used)
0.005 mm
GP-GL: 0.1, 0.05, 0.025, 0.01 mm; HP-GL™: 0.025 mm*
Within ±0.2% of the distance moved or ±0.1 mm, whichever is larger
Within 0.3/430 mm
Within 0.1 mm (excluding media expansion/contraction)
3
Within 0.3 mm
2
Supersteel, ceramic, and sapphire blades
Water-based fiber tip pen, oil-based ballpoint pens
Marking film (polyvinyl, fluorescent, reflective)
Paper of 0.5-mm thickness or less (pattern paper, oilboard)*
Compressed polystyrene sheets of 0.8-mm thickness or less*
Sandblasting rubber of 1 mm thickness or less*
High-luminance reflective film*
RS-232-C serial and USB 2.0 (Full speed)
2 Mbytes
GP-GL and HP-GL™ emulation (menu-selectable)
20 characters x 2 lines
100 to 120 VAC/200 to 240 VAC, 50/60 Hz
120 VA or less
10 to 35°C, 35 to 75% R.H. (non-condensing)
Approx. 857 x 780 x 200 mm
Approx. 19 kg
1
FC4550-50
FC4500-60
910 × 610 mm
666 mm
Within 0.4/610 mm Within 0.4/600 mm
5
6
Approx. 1172 x 964 x 200 mm
Approx. 26 kg
1 INTRODUCTION
FC4510-60
960 × 600 mm
0.10 to 5.88 N (10 to
600 gf)
1
Within 0.2 mm
4
5
Approx. 27 kg
Advertisement
Table of Contents
