Turn Signal Light Removal/Installation; Turn Signal Light/Relay Removal/Installation - Honda CRF1000 Shop Manual

dummyhead dummyhead
LIGHTS/METERS/SWITCHES
TURN SIGNAL LIGHT REMOVAL/
INSTALLATION
FRONT
Remove the inner panel cover (page 2-8).
Disconnect the front turn signal light 2P connector [1].
– Right side: light blue
– Left side: orange
Remove the following:
– Nut [2]
– Collar [3]
– Grommet [4]
– Front turn signal light [5]
– Front turn signal light cover [6]
Installation is in the reverse order of removal.
TORQUE: 8.8 N·m (0.9 kgf·m, 6.5 lbf·ft)
REAR
Remove the rear carrier (page 2-12).
Disconnect the rear turn signal light 2P connector.
– Right side: light blue [1]
– Left side: orange [2]
Remove the following:
– Nut [3]
– Collar [4]
– Grommet [5]
– Front turn signal light [6]
Installation is in the reverse order of removal.
TORQUE: 8.8 N·m (0.9 kgf·m, 6.5 lbf·ft)
TURN SIGNAL LIGHT RELAY
REMOVAL/INSTALLATION
Remove the ETC tray (page 2-11).
Release the turn signal relay [1] and cover [2].
Remove the relay cover and disconnect the relay from
the relay connector.
Installation is in the reverse order of removal.
22-6
Right side shown: [4]
[5]
[6]
[1]
Right side
shown:
[6]
[2]
[1]
[4]
[2]
[3]
[5]
[3]
[1]/[2]