dummyhead
dummyhead
Remove the bolts [1] and clutch EOP sensor cover [2].
Disconnect the following:
– Clutch line EOP sensor 3P (Gray) connector [1]
– No.1 Clutch EOP sensor 3P (Gray) connector [2]
– No.2 Clutch EOP sensor 3P (Black) connector [3]
Remove the bolt [4] and wire stay [5].
Release the linear solenoid valve wire [1] and main wire
harness [2] from the clamps [3].
Disconnect the linear solenoid valve 4P (Black)
connector [4].
Remove the clutch oil feed pipe (page 13-50).
Loosen the hose band screw [1].
Disconnect the radiator lower hose [2].
DUAL CLUTCH TRANSMISSION (DCT) (CRF1000D)
[2]
[5]
[3]
[1]
[2]
[4]
[1]
[3]
[4]
[3]
[2]
[1]
13-53
[1]
[2]