Honda CRF1000 Shop Manual page 187

dummyhead dummyhead
Connect the throttle cables [1] to the throttle drum and
throttle cable stay.
Tighten the throttle cable B lock nut [2] to the specified
torque.
TORQUE: 8.5 N·m (0.9 kgf·m, 6.3 lbf·ft)
Temporarily tighten the throttle cable A adjuster lock nut
[3].
Connect the injector 2P (Black) [1] and 2P (Blue) [2]
connectors.
Install the throttle body [1].
• Make sure that the band screws (throttle body side)
[2] is in position as shown.
• Align the insulator grooves with the throttle body
lugs.
Tighten the insulator band screws (throttle body side) to
the specified range as shown.
[2]
[1]
[1]
Align
[1]
Front
14 ± 1.0 mm
(0.6 ± 0.04 in)
[2]
FUEL SYSTEM
[3]
[1]
[2]
Align
14 ± 1.0 mm
(0.6 ± 0.04 in)
[2]
7-15