Oil Pump (Crf1000/A) Disassembly/Assembly; Pressure Relief Valve Inspection - Honda CRF1000 Shop Manual

dummyhead dummyhead
LUBRICATION SYSTEM
DISASSEMBLY/ASSEMBLY
• Dip all parts in clean engine oil.
FLANGE BOLTS (6 x 55 mm)
12 N·m (1.2 kgf·m, 9 lbf·ft)
FLANGE BOLT (6 x 35 mm)
12 N·m (1.2 kgf·m, 9 lbf·ft)
ENGINE OIL FEED
PUMP OUTER
ROTOR
ENGINE OIL FEED
PUMP INNER ROTOR
DOWEL PINS
DOWEL PINS
OIL PUMP BODY B
OIL PUMP INSPECTION
Refer to CRF1000D oil pump inspection (page 9-8).
PRESSURE RELIEF VALVE
INSPECTION
Remove the pressure relief valve (page 9-6).
Refer to pressure relief valve (CRF1000D) inspection
(page 9-8).
9-6
FLANGE BOLT (6 x 75 mm)
12 N·m (1.2 kgf·m, 9 lbf·ft)
DRIVE PIN
O-RING
DRIVE PIN
SCAVENGE PUMP
INNER ROTOR
SCAVENGE PUMP
OUTER ROTOR
OIL PUMP BODY A
OIL PUMP SHAFT
SEALING BOLT (6 x 22 mm)
30 N·m (3.1 kgf·m, 22 lbf·ft)
ENGINE OIL
PRESSURE
RELIEF VALVE
OIL PUMP BODY C
FLANGE BOLT (6 x 20 mm)
12 N·m (1.2 kgf·m, 9 lbf·ft)
FLANGE BOLT (6 x 40 mm)
12 N·m (1.2 kgf·m, 9 lbf·ft)