Honda CRF1000 Shop Manual page 407

dummyhead dummyhead
Tighten the swingarm pivot nut to the specified torque.
TORQUE: 80 N·m (8.2 kgf·m, 59 lbf·ft)
• Apply engine oil to the swingarm pivot nut [1]
threads and seating surface.
• Apply a thin coat of grease to the swingarm pivot
bolt [2] sliding surface.
Tighten the rear lower nut (10 mm) [1] to the specified
torque.
TORQUE: 44 N·m (4.5 kgf·m, 32 lbf·ft)
Tighten the front lower nut (10 mm) [1] to the specified
torque.
TORQUE: 44 N·m (4.5 kgf·m, 32 lbf·ft)
Tighten the front middle nuts (8 mm) [1] to the specified
torque.
TORQUE: 32 N·m (3.3 kgf·m, 24 lbf·ft)
Tighten the front middle nuts (10 mm) [2] to the
specified torque.
TORQUE: 44 N·m (4.5 kgf·m, 32 lbf·ft)
ENGINE REMOVAL/INSTALLATION
[2]
[1]
[1]
[2]
[1]
[1]
16-11