Headlight; Turn Signal Light - Honda C8R600F4 Service Manual

HEADLIGHT
BULB REPLACEMENT
A halogen headlight bulb becomes very hot while
the headlight is ON, and remains hot for a while
after it is turned OFF. Be sure to let it cool down
before servicing.
Disconnect the headlight connector.
Remove the dust cover.
Unhook the bulb retainer and replace the headlight
bulb.
CAUTION:
Avoid touching halogen headlight bulb. Finger
prints can create hot spots that cause a bulb to
break.
If you touch the bulb with your bare hands, clean it
with a cloth moistened with alcohol to prevent its
early failure.
lm;lall lilt:: rt::r11uvt::LI µarls i11 Lht:: rt::vt::rst:: urLlt::r uf rt::-
moval.
REMOVAL/INSTALLATION
Remove the front fairing (page 2-5).
Remove the four screws, washers, two clamps and
the headlight unit.
Route the wires
Install the headlight unit in the reverse order of re-
and hose properly
moval.
(page 1·18).
TURN SIGNAL LIGHT
BULB REPLACEMENT
Remove the screw and turn signal light lens.
LIGHTS/METERS/SWITCHES
RETAINER
HEADLIGHT BULB CONNECTOR
HEADLIGHT UNIT CLAMPS
19-3