Honda CRF1000 Shop Manual page 327

dummyhead dummyhead
Rotate the water pump shaft and align the shaft slit with
the pump cover index line as shown.
Install the right crankcase cover [1].
Install the bolts [2] and tighten them in a crisscross
pattern in 2 or 3 steps to the specified torque.
TORQUE: 12 N·m (1.2 kgf·m, 9 lbf·ft)
Coat a new O-ring [1] with engine oil and install it onto
the water pipe [2].
Install the water pipe [1].
Tighten the hose band screw [2] to the specified range
(page 8-8).
Install the bolts [3] and tighten them to the specified
torque.
TORQUE: 12 N·m (1.2 kgf·m, 9 lbf·ft)
DUAL CLUTCH TRANSMISSION (DCT) (CRF1000D)
[1]
[2]
[2]
[3]
Align
[2]
[1]
[1]
[3]
13-57