Battery Removal/Installation - Honda CRF1000 Shop Manual

dummyhead dummyhead
BATTERY

BATTERY REMOVAL/INSTALLATION

Remove the bolts [1].
Remove the tool box band [2] by releasing tab [3] from
the guide [4].
Remove the tool box [5].
Open the battery box lid [1].
Always turn the
ignition switch OFF
Remove the bolts [2] and disconnect the negative (-)
before removing the
ground terminal [3] first.
battery.
Then remove the bolt [4] and disconnect the positive (+)
terminal [5].
Remove the battery case [6] by pulling it out.
Remove the bolt [1] and battery negative (-) cable [2].
Remove the battery [3] from the battery case [4].
Install the battery in the reverse order of removal.
Connect the
positive (+) terminal
first and then the
• For digital clock setting procedure (page 22-15).
negative (-)
terminal.
BATTERY/CHARGING SYSTEM
[5] [2]
[4]
[4]
[2]
[5]
[1]
[1]
[3]
[1]
[2]
[3]
[2]
[3]
[4]
21-5