Honda CRF1000 Shop Manual page 440

dummyhead dummyhead
FRONT WHEEL/SUSPENSION/STEERING
Install the following:
– Clutch cable [1] (CRF1000/A)
– Parking brake cable [1] (CRF1000D)
– Throttle cables [2]
– Front brake hose A [3]
– Handlebar switch wire clips [4]
Install the stay [1].
• Align the boss of stay with the hole of the frame.
Install the bolt [1] and tighten it securely.
Install the wire clips [2] to the stay [3].
Install the wire band [4].
Connect the immobilizer receiver 4P (Black) [1] and
ignition switch 2P (Brown) [2] connectors and install
them to the ignition coil tray.
Install the air cleaner case (page 7-11).
Install the handlebar lower holder (page 17-7).
17-28
[2]
[3]
[4]
[1]
[2] [1] [3]
[2]
[4]
[1]
Align
[4]
[1]