Brake Pads Wear Inspection; Brake System Mainenance; Hydraulic System Inspection; Brake Lever Adjustment - Honda CRF1000 Shop Manual

Hide thumbs Also See for CRF1000:

Table of Contents

BRAKE PADS WEAR

Check the brake pads for wear.

Replace the brake pads if either pad is worn to the

bottom of wear limit groove [1].

Refer to front brake pad replacement (page 19-8).

Refer to rear brake pad replacement (page 19-9).

BRAKE SYSTEM

Firmly apply the brake lever or pedal, and check that no

air has entered the system.

If the lever or pedal feels soft or spongy when operated,

bleed the air from the system (page 19-7).

Inspect the brake hose [1] and fittings for deterioration,

cracks, and signs of leakage.

Tighten any loose fittings.

Replace hoses and fittings as required.

The distance between the top of the brake lever and the

grip can be adjusted by turning the adjuster [1].

• Align the " " mark [2] on the brake lever with the

index number on the adjuster.

Troubleshooting

Crf1000a Crf1000d