Table of Contents
Advertisement
dummyhead
dummyhead
DISASSEMBLY/ASSEMBLY
VALVE BODY
STOPPER PLATE
STOPPER PLATE BOLT
12 N·m (1.2 kgf·m, 9 lbf·ft)
• Clean all the parts with compressed air. Make sure
that there is no dust or lint on any parts.
• Apply locking agent to the solenoid valve stopper
plate bolt threads (page 1-20).
INSTALLATION
Coat a new O-ring [1] with engine oil, and install it onto
the linear solenoid valve body.
Install the dowel pins [2] and separator plate [3] onto
the linear solenoid valve body.
DUAL CLUTCH TRANSMISSION (DCT) (CRF1000D)
GASKET
LINEAR SOLENOID
VALVE BODY
VALVES
COVER
COVER BOLTS
12 N·m (1.2 kgf·m, 9 lbf·ft)
[1]
[2]
13-61
[3]
Advertisement
Table of Contents
Troubleshooting
