Starter Relay Switch Removal/Installation; Starter Relay Switch Inspection - Honda CRF1000 Shop Manual

dummyhead dummyhead
STARTER RELAY SWITCH
REMOVAL/INSTALLATION
Remove the socket bolt [1].
Remove the battery box cover [2] by releasing the tab
[3].
Release the starter relay switch [1] from the battery box.
Remove the starter relay switch cover [2].
Disconnect the starter relay switch 4P (Black)
connector [1].
Remove the bolts [2] and disconnect the starter motor
cable [3] and battery positive (+) cable [4] from the
starter relay switch.
Installation is in the reverse order of removal.
INSPECTION
Remove the battery box cover (page 6-7).
Shift the transmission into neutral.
Turn the ignition switch ON and engine stop switch " ".
Push the starter switch.
The coil is normal if the starter relay switch [1] clicks.
If you don't hear the starter relay switch "CLICK",
inspect the starter relay switch as follows:
ELECTRIC STARTER
[3]
[2]
[1]
[2]
[4]
[3]
[1]
[1]
[2]
[1]
6-7