Honda CRF1000 Shop Manual page 437

dummyhead dummyhead
Temporarily install the steering stem nut [1] onto the
steering stem [2] to prevent the threads from being
damaged when removing the lower inner race [3] from
the steering stem.
Remove the lower inner race with a chisel or equivalent
tools, being careful not to damage the steering stem.
Remove the lower dust seal [4].
Apply specified grease to a new lower dust seal lips
(page 1-23).
Install the dust seal [1] to the steering stem [2].
Install a new lower inner race [3] using a hydraulic
press and special tool.
TOOL:
Inner driver, 30 x 36 x 300 L [4]
Drive in a new upper outer race [1] using the special
tools.
TOOLS:
Driver [2]
Attachment, 42 x 47 mm [3]
Drive in a new lower outer race [1] using the special
tools.
TOOLS:
Driver [2]
Attachment, 52 x 55 mm [3]
FRONT WHEEL/SUSPENSION/STEERING
[2]
[1]
[4]
07946-MB00000
[1]
07749-0010000
07746-0010300
07749-0010000
07746-0010400
[2]
[3]
[1]
[4]
[3]
[2]
[2]
[3]
[1]
[3]
17-25