Open Air Temperature Sensor Removal/Installation - Honda CRF1000 Shop Manual

dummyhead dummyhead
TACHOMETER SIGNAL LINE OPEN CIRCUIT
INSPECTION
Disconnect the following:
– ECM/PCM 33P (Gray) connector (page 4-39)
– Combination meter 32P (Gray) connector (page 22-
12)
Check for continuity between the ECM/PCM 33P (Gray)
[1] and 32P (Black) [2] connectors.
TOOL:
Test probe
CONNECTION: C15 – Yellow/green
There should be continuity.
OPEN AIR TEMPERATURE SENSOR
REMOVAL/INSTALLATION
Remove the right middle cowl (page 2-6).
Remove the trim clip [1] and front inner cover [2].
Disconnect the open air temperature sensor 2P (Black)
connector [1].
Remove the screw [1] and open air temperature sensor
[2].
Installation is in the reverse order of removal.
07ZAJ-RDJA110
LIGHTS/METERS/SWITCHES
[1]
[2]
Y/G
[1]
[2]
[2]
C15
[1]
[1]
22-17