Linear Solenoid Valve Removal - Honda CRF1000 Shop Manual

dummyhead dummyhead
DUAL CLUTCH TRANSMISSION (DCT) (CRF1000D)
LINEAR SOLENOID VALVE
REMOVAL
• Keep dust and dirt away from all the parts.
• Be careful not to damage the mating surfaces of the
valve body components.
Drain the engine oil (page 3-12).
Remove the right middle cowl (page 2-6).
Remove the clutch EOP sensor cover (page 13-80).
Release the linear solenoid valve wire [1] from the
clamps [2].
Disconnect the linear solenoid valve 4P (Black)
connector [3].
Remove the bolts [1] and linear solenoid valve body [2].
Remove the separator plate [1], dowel pins [2], and O-
ring [3].
Remove the O-ring [4] and spool valve filter/packing [5].
Remove the packing from the spool valve filter.
Check the spool valve filter and replace if necessary.
13-60
[2]
[1]
[1]
[1]
[3]
[2]
[3]
[2]
[2]
[5]
[4]