Honda CRF1000 Shop Manual page 552

dummyhead dummyhead
LIGHTS/METERS/SWITCHES
Remove the right middle cowl (page 2-6).
Disconnect the rear ABS/G switch 4P (Black) connector
[1].
Check for continuity between the switch side terminals.
Connection: Blue/black – Green/black
There should be continuity with the switch pushed, and
there should be no continuity with the switch released.
If the switch operate properly, open circuit in the
following wires:
– Blue/black wire between the switch and PCM
– Green/black wire between the switch and ground
If the switch does not operate properly, replace the
switch (page 22-30).
22-32
[1]
[1]
Bu/Bl
G/Bl