Air Cleaner Housing Removal/Installation - Honda CRF1000 Shop Manual

dummyhead dummyhead
RELAY INSPECTION
Remove the fuel pump relay (page 7-10).
Refer to FI relay inspection (page 4-44).
AIR CLEANER HOUSING
REMOVAL/INSTALLATION
Remove the following:
– Front cover (page 2-7)
– Fuel tank (page 7-6)
Release the left/right tabs [1] of the air cleaner duct
from the inner cover.
Left side only: Release the front No.1 sub harness 12P
(Black) [2] and No.2 sub harness 12P (Gray) [3]
connectors from the connector stays.
Release the wire band [1] and clamp [2].
CRF1000D: Release the wire band [1] and clamp [2].
Release the clamp [3].
Left side shown: [2]
[1]
CRF1000D shown:
[1]
[3]
FUEL SYSTEM
[3]
[1]
[2]
[2]
7-11