dummyhead
dummyhead
HYDRAULIC BRAKE
PARKING BRAKE LEVER (CRF1000D)
REMOVAL
Remove the knuckle guard (page 2-5).
Remove the rearview mirror (page 17-4).
Disconnect the parking brake switch connectors [1].
Remove the bolts [1], holder [2], and parking brake
lever assembly [3].
Loosen the lock nut [4] and disconnect the parking
brake cable by turning the adjuster [5].
Installation is in the reverse order of removal.
Check the parking brake lock operation (page 3-21).
DISASSEMBLY/ASSEMBLY
PARKING BRAKE STOPPER STAY FLANGE BOLT
11.9 N·m (1.2 kgf·m, 9 lbf·ft)
LOCK LEVER PIVOT BOLT
6.9 N·m (0.7 kgf·m, 5.1 lbf·ft)
PARKING BRAKE LEVER
PIVOT BOLT
1.0 N·m (0.1 kgf·m, 0.7 lbf·ft)
KNUCKLE GUARD HOLDER
• Apply locking agent to the parking brake switch
mounting screw threads (page 1-20).
19-22
STOPPER STAY
LOCK LEVER
COLLAR
PARKING BRAKE LEVER PIVOT NUT
5.9 N·m (0.6 kgf·m, 4.4 lbf·ft)
[1]
[3]
RETURN
SPRING
[4]
[5]
[2]
PARKING BRAKE STOPPER
STAY HEX BOLT
2.3 N·m (0.2 kgf·m, 1.7 lbf·ft)
PARKING BRAKE LEVER
BRACKET
PARKING BRAKE SWITCH
PARKING BRAKE SWITCH
MOUNTING SCREW
1.2 N·m (0.1 kgf·m, 0.9 lbf·ft)
PARKING BRAKE LEVER
[1]