LIGHTS/METER/SWITCHES
TURN SIGNAL LIGHT
BULB REPLACEMENT
Remove the screw.
Remove the turn signal lens and seal rubber.
While pushing in, turn the bulb counterclockwise to
remove it and replace with a new one.
Check the seal rubber for fatigue or damage and
replace it if necessary.
At installation, align the tab of the turn signal lens
with the slit of the turn signal unit.
Install the turn signal lens in the reverse order of
removal.
REMOVAL/INSTALLATION
FRONT TURN SIGNAL LIGHT
Remove the front cowl (page 2-5).
Remove the mounting nut, setting plate and turn
signal unit.
Installation is in the reverse order of removal.
20-8
TURN SIGNAL UNIT
NUT