Honda CRF1000 Shop Manual page 91

dummyhead dummyhead
Check the No.2 cylinder intake valve clearances by
inserting a feeler gauge [1] between the valve lifter and
cam lobe.
No.2 cylinder intake valve clearance:
0.16 ± 0.03 mm (0.006 ± 0.001 in)
Adjust the valve clearance by changing the valve lifter
shim (page 3-10).
Check the No.2 cylinder exhaust valve clearances by
inserting a feeler gauge [1] between the rocker arm
roller and cam lobe.
No.2 cylinder exhaust valve clearance:
0.23 ± 0.02 mm (0.009 ± 0.001 in)
Adjust the No.2 cylinder exhaust valve clearance by
loosening the lock nut [1] and turning the adjusting
screw [2] until there is a slight drag on the feeler gauge
[3].
TOOL:
Valve adjusting wrench [4]
Apply engine oil to the adjusting screw and lock nut
threads and seating surface.
Hold the adjusting screw and tighten the lock nut.
TORQUE: 10 N·m (1.0 kgf·m, 7 lbf·ft)
After tightening the lock nut, recheck the valve
clearance.
Rotate the crankshaft counterclockwise 252.5° and
align the "E1" mark [1] with the index mark [2].
Make sure that the " " mark [3] on the cam sprocket
align with the upper surface of the cylinder head as
shown.
07708-0030400
[3]
[1]
MAINTENANCE
[1]
[1]
[4]
[1]
[2]
[2]
[3]
3-9