Turn Signal Light; Tail/Brake Light; License Light - Honda 1998 VT750C Service Manual

LIGHTS/METERS/SWITCHES
TURN SIGNAL LIGHT
Remove the screw and turn signal lens.
While pushing in, turn the bulb counterclockwise to
remove it and replace with a new one.
Installation is in the reverse order of removal.
NOTE:
• When performing turn signal light lens installation,
align the tab on the lens with the groove on the
turn signal light case.
• Seat the rubber packing properly.
TAIL/BRAKE LIGHT
Remove the screws and tail/brake light lens.
While pushing in, turn the bulb counterclockwise to
remove it and replace with a new one.
Seat the rubber
Installation is in the reverse order of removal.
packing properly.
Do not damage
LICENSE LIGHT
the wire harness.
Remove the screws and license light cover.
Remove the lens attaching nuts on the reverse side
ofthe license plate base and remove the license-light
lens and cover.
While pushing in, turn the bulb counterclockwise to
remove it.
Installation is in the reverse order of removal.
19-8
SCREWS
BULB