Honda CRF1000 Shop Manual page 410

dummyhead dummyhead
ENGINE REMOVAL/INSTALLATION
Connect the clutch cable [1] to the clutch lifter arm [2].
CRF1000/A:
Install the clutch cable holder [3] and bolt [4] and tighten
the bolt securely.
Connect the ECT sensor 2P (Black) connector [1].
Connect the radiator upper hose [2] and tighten the
hose band screw [3] to the specified range (page 8-8).
Connect the following:
– VS sensor 3P (Black) connector [1]
– Outer mainshaft 3P (Black) connector (CRF1000D)
[2]
– Shift
(CRF1000D) [3]
16-14
control motor 2P (Black)
[2]
[2]
CRF1000/A:
connector
[1]
CRF1000D:
[2]
[1]
[1] [4]
[3]
[3]
[1]
[3]