1. Manuals
  2. Brands
  3. Honda Manuals
  4. Motorcycle
  5. CRF125F 2023
  6. Owner's manual

Honda CRF125F 2023 Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Models sold in and used in California:
The removal or modification of evaporative emission-related parts on this OHRV is illegal. Violators may be
subject to civil and/or criminal penalties as provided under California and federal law.
Owner's Manual
OW N E R'S
M A N UA L
2023 CRF125F/FB

Advertisement

Table of Contents
loading

Related Manuals for Honda CRF125F 2023

Summary of Contents for Honda CRF125F 2023

  • Page 1 Models sold in and used in California: The removal or modification of evaporative emission-related parts on this OHRV is illegal. Violators may be subject to civil and/or criminal penalties as provided under California and federal law. Owner’s Manual OW N E R’S M A N UA L 2023 CRF125F/FB...
  • Page 2 This publication includes the latest production information available before printing. Honda Motor Co., Ltd. reserves the right to make changes at any time without notice and without incurring any obligation. No part of this publication may be reproduced without written permission.
  • Page 3 2023 Honda CRF125F/FB OWNER’S MANUAL FOR OFF-ROAD USE ONLY This vehicle is designed and manufactured for off-road use only. USA only: It conforms to US EPA Noise Emission regulations, but does not conform to Federal Motor Vehicle Safety Standards or US EPA On Highway Exhaust Emission regulations, and operation on public streets, roads, or highways is illegal.
  • Page 4 A Few Words About Safety Your safety, and the safety of others, is very important. And operating this motorcycle safely is an important responsibility. To help you make informed decisions about safety, we have provided operating procedures and other information on labels and in this manual. This information alerts you to potential hazards that could hurt you or others.
  • Page 5 A Few Words About Safety These signal words mean: You WILL be KILLED or SERIOUSLY HURT if you don't follow instructions. You CAN be KILLED or SERIOUSLY HURT if you don't follow instructions. You CAN be HURT if you don't follow instructions. •...

  • Page 6: Table Of Contents

    Why your motorcycle needs regular Motorcycle Safety ......... 1 maintenance, what you need to know before Important safety information, a special servicing your Honda, a maintenance message for parents, precautions about schedule, and instructions for specific loading, accessories, and modifications, and maintenance items.
  • Page 7 What to do if you have a flat tire, your engine won’t start, etc. Technical Information......145 ID numbers, technical specifications, and other technical facts. Consumer Information ......161 Information on warranties and how to get Honda service manuals. Index ..............169 Contents...

  • Page 8: Introduction

    It’s full of facts, instructions, safety information, and helpful When you own a Honda, you’re part of a tips. To make it easy to use, the manual worldwide family of satisfied customers – contains a detailed list of topics at the people who appreciate Honda’s reputation for...
  • Page 9 If you have any questions, or if you ever need a special service or repairs, remember that your Honda dealer knows your motorcycle best and is dedicated to your complete satisfaction. Please report any change of address or...

  • Page 10: Motorcycle Safety

    Motorcycle Safety This section presents some of the most Important Safety Information ......2 important information and recommendations to Important Message to Parents ......5 help you ride your motorcycle safely. Please Loading, Accessories & Modifications...8 take a few moments to read these pages. This Loading ............8 section also includes a special message for Accessories &...

  • Page 11: Important Safety Information, A Special

    Important Safety Information Your motorcycle can provide many years of Always Wear a Helmet It’s a proven fact: helmets significantly reduce service and pleasure–if you take responsibility the number and severity of head injuries. So for your own safety and understand the always wear an approved motorcycle helmet.
  • Page 12 Important Safety Information Ride Off-road Only Be Alert for Off-road Hazards Your motorcycle is designed and manufactured for The terrain can present a variety of challenges off-road use only. The tires are not made for when you ride off-road. Continually ‘‘read’’ the pavement, and the motorcycle does not have turn terrain for unexpected turns, drop-offs, rocks, signals and other features required for use on public...
  • Page 13 The same is true for drug use. Don't drink or use and ride, and don't let your friends do it either. Keep Your Honda in Safe Condition It’s important to keep your motorcycle properly maintained and in safe riding condition.

  • Page 14: Important Message To Parents

    Important Message to Parents Your child’s safety is very important to Honda. PHYSICAL ABILITY is an important That’s why we urge you to read this message consideration. For example, riders must be big before you let any young person ride this enough to hold the motorcycle up, get on, and motorcycle.
  • Page 15 Important Message to Parents MENTAL AND EMOTIONAL MATURITY GOOD INSTRUCTION is an important part of are requirements for safe riding. Does your hands-on training. The teacher can either be youngster think through problems and come to you or another responsible adult who has logical solutions? On a bicycle, does your experience with off-road motorcycle riding.
  • Page 16 Important Message to Parents SUPERVISION is another important obligation of parents. Even after youngsters have become skilled off-road riders, they should always ride with adult supervision. It helps to regularly remind young riders of basic safety rules and precautions. And remember, it’s your responsibility to see that the motorcycle is properly maintained and kept in safe operating condition.

  • Page 17: Loading, Accessories & Modifications

    Loading, Accessories & Modifications Your Honda was designed as a rider-only More specific information on load limits, motorcycle. It was not designed to carry a accessories, and modifications follows. passenger or cargo. A passenger or cargo could interfere with your ability to move around to...
  • Page 18 Loading, Accessories & Modifications Load Limits • Keep cargo small and light. Make sure it Following are the load limits for your cannot easily be caught on brush or other motorcycle: objects, and that it does not interfere with your ability to shift position to maintain Maximum weight capacity balance and stability.

  • Page 19: Accessories & Modifications

    Before you consider making any modifications and use of non-Honda accessories. Check with or adding an accessory, be sure to read the your dealer for assistance and always follow following information.
  • Page 20 Loading, Accessories & Modifications Modifications We strongly advise you not to remove any original equipment or modify your motorcycle in any way that would change its design or operation. Such changes could seriously impair your motorcycle’s handling, stability, and braking, making it unsafe to ride. We also advise you not to make any modifications or remove any equipment (such as the USDA qualified spark arrester or...

  • Page 21: Safety Labels

    Safety Labels This page shows the locations of safety labels on your motorcycle. Some labels warn you of potential hazards that could cause serious injury. Others provide important safety information. Read these labels carefully and don’t remove them. If a label comes off or becomes hard to read, contact your dealer for a replacement. (For USA) (For Canada) Motorcycle Safety...

  • Page 22: Operating Controls

    Operating Controls When you ride off-road, you need to operate Operation Component Locations ....14 the throttle, clutch, brakes, and other controls Operating Controls ........17 without stopping to look at them. Read this Ignition Switch..........17 section carefully before you ride. It describes Start Button ..........18 the location, function, and operation of all the Engine Stop Switch........18...

  • Page 23: Operation Component Locations

    Operation Component Locations fuel reserve indicator ignition switch engine stop switch clutch lever front brake lever throttle grip ignition indicator start button PGM-FI malfunction indicator lamp (MIL) Operating Controls...
  • Page 24 Operation Component Locations kickstarter rear brake pedal Operating Controls...
  • Page 25 Operation Component Locations shift lever Operating Controls...

  • Page 26: Operating Controls

    Operating Controls FRONT Ignition Switch The ignition switch (1) is used to prevent unauthorized use of the motorcycle. Before riding, insert the key and turn it to the (ON) position. Function Key Removal Position (1) ignition switch The engine cannot be The key can be (OFF) operated.

  • Page 27: Start Button

    Operating Controls Front Brake Lever Start Button The front brake lever is used to slow or stop The start button is used for starting the engine. your motorcycle. To operate, pull the lever. Pushing the button in starts the engine. See For information on braking techniques, see Starting Procedure, page 31.

  • Page 28: Clutch Lever

    Operating Controls Clutch Lever Rear Brake Pedal The clutch lever is used to disengage the clutch The rear brake pedal is used to slow or stop whenever you shift gears. To operate, pull the your motorcycle. To operate, depress the pedal. clutch lever in all the way before shifting, then For information on braking techniques, see slowly release it after shifting.

  • Page 29: Side Stand

    Operating Controls Side Stand PGM-FI malfunction indicator lamp (MIL) The side stand is used to support your motorcycle while parked (page 38). To operate, Lights when there is any abnormality in the use your foot to lower the stand. Before riding, PGM-FI (Programmed Fuel Injection) system.

  • Page 30: Fuel Reserve Indicator

    Operating Controls Fuel Reserve Indicator Ignition indicator When this indicator comes on while riding, fuel When the ignition switch is turned on, the reserved in the tank is about: 0.2 US gal (0.7 ignition indicator comes on. If the indicator does not come on when it The indicator should also light for a few should, have your dealer check for problems.
  • Page 31 This page intentionally left blank. Operating Controls...

  • Page 32: Before Riding

    Before Riding Before each ride, you need to make sure you Are You Ready to Ride? .......24 and your Honda are both ready to ride. To help Protective Apparel ........24 get you prepared, this section discusses how to Is Your Motorcycle Ready to Ride? .....26 evaluate your riding readiness and how to Pre-ride Inspection ........26...

  • Page 33: Are You Ready To Ride

    Are You Ready to Ride? Before you ride your motorcycle for the first Protective Apparel time, we strongly recommend that you: • read this owner’s manual For your safety, we strongly recommend that • make sure you understand all the safety you always wear an approved motorcycle messages helmet, eye protection, boots, gloves, long...
  • Page 34 Are You Ready to Ride? Transportation) sticker on any helmet you buy (USA only). Always wear a face shield or goggles to protect your eyes and help your Not wearing a helmet increases the vision. chance of serious injury or death in a crash.

  • Page 35: Is Your Motorcycle Ready To Ride

    Is Your Motorcycle Ready to Ride? Before each ride, it’s important to inspect your Note to Parents: motorcycle and make sure any problem you If a youngster will be performing any of the find is corrected. A pre-ride inspection is a following pre-ride inspection procedures, it’s must because off-road riding can be tough on a your responsibility to provide careful...
  • Page 36 Is Your Motorcycle Ready to Ride? Leaks Look under the motorcycle for Nuts & Bolts Use a wrench to make sure all signs of leaking fluids (fuel, accessible nuts, bolts, and engine oil, brake fluid). fasteners are tight. Engine Oil Check the level and add oil if Spark Plug Check for looseness (page 77).
  • Page 37 Is Your Motorcycle Ready to Ride? Check these items after you get on the Clutch Check for smooth operation and motorcycle: Lever adjust if needed (page 74). Throttle Check the freeplay and adjust if Indicators Turn the ignition on and check needed.

  • Page 38: Basic Operation & Riding

    Tips & Practice Guide How to Stop the Engine ......33 for the Off -Highway Motorcyclist booklet that Shifting Gears ..........34 came with your Honda (USA only). Braking............36 Parking ............38 To protect your new engine and enjoy optimum Post-ride Inspection........39...

  • Page 39: Safe Riding Precautions

    Basic Operation & Riding Safe Riding Precautions Running the engine of your vehicle Before riding your motorcycle for the first while in an enclosed or even partially time, please review the Important Safety enclosed area can cause a rapid build- Information beginning on page 2 and the up of toxic carbon monoxide gas.

  • Page 40: Starting & Stopping The Engine

    Starting & Stopping the Engine Always follow the proper starting procedure Preparation described below. Before starting, insert the key and turn the Your motorcycle can be started with the transmission in gear by pulling in the clutch ignition switch to the (ON) position, and lever before operating the start button.

  • Page 41: Starting Procedure

    Starting & Stopping the Engine Starting Procedure Allowing the kickstarter to snap back freely against the pedal stop can damage the engine This motorcycle has a fuel-injected engine. case. Follow the procedure indicated below. 2. If you cannot start the engine, open the Any Air Temperature throttle slightly (about 1/8 in (3 mm), without freeplay).

  • Page 42: Flooded Engine

    Starting & Stopping the Engine Flooded Engine Bank Angle Sensor Ignition Cut-off System If the engine fails to start after repeated attempts, it may be flooded with excess fuel. Your motorcycle’s banking (lean angle) sensor To clear a flooded engine: system is designed to automatically stop the engine and fuel pump if the motorcycle is 1.

  • Page 43: Shifting Gears

    Shifting Gears 3. Depress the shift lever from neutral down to first gear. 4. Release the front brake. Gradually open the throttle while you slowly release the clutch lever. If engine rpm (speed) is too low when you release the clutch lever, the engine will stall. If engine rpm is too high or you release the clutch lever too quickly, your motorcycle may lurch forward.
  • Page 44 Shifting Gears Learning when to shift gears comes with 6. To continue shifting up to each higher gear, repeat step 5. experience. Upshift to a higher gear or reduce 7. To shift down to a lower gear, close the throttle before engine rpm (speed) gets too throttle, pull the clutch lever in, and depress high.

  • Page 45: Braking

    Braking To slow or stop, apply the front brake and rear Generally, reduce your speed or complete brake smoothly while downshifting to match braking before beginning a turn. Avoid braking your speed. Gradually increase braking as you or closing the throttle quickly while turning. feel the brakes slowing your speed.
  • Page 46 Braking When descending a long, steep grade, use engine compression braking by downshifting, with intermittent use of both brakes. When you brake to a stop, pull the clutch lever in before stopping completely to prevent stalling the engine. For support, put your left foot on the ground first, then your right foot when you have finished braking.

  • Page 47: Parking

    Parking Lower the side stand to support your motorcycle. Turn the ignition switch OFF and remove the key. Always choose a level place to park. Basic Operation & Riding...

  • Page 48: Post-Ride Inspection

    Post-ride Inspection When you return home after riding, thoroughly clean your motorcycle and remove any dirt, mud, brush, rocks or other objects you may have picked up along the way. After cleaning, carefully inspect your motorcycle for leaks or damage. Be sure to lubricate the drive chain (page 107) to prevent rusting.
  • Page 49 This page intentionally left blank. Basic Operation & Riding...

  • Page 50: Servicing Your Honda

    You’ll also find important safety precautions, are ‘‘certified’’ to EPA standards. information on oils, and tips for keeping your Honda looking good. Before You Service Your Honda The Importance of Maintenance ....43 For information about the exhaust emission and Maintenance Safety........45 noise emission requirements of the U.S.
  • Page 51 Servicing Your Honda Service Preparations Engine Maintenance Component Locations ..... 52 Throttle............72 Tools ............. 55 Clutch System ..........74 Seat Removal..........56 Spark Plug .............77 Left Side Cover Removal ......57 Spark Arrester ..........79 Service Procedures Chassis Fluids & Filters Suspension ............81 Fuel ...............
  • Page 52 More frequent service is needed if you subject Always follow the inspection and your motorcycle to severe use (such as maintenance recommendations and competition) or ride in unusually wet or dusty schedules in this owner’s manual. areas. (cont’d) Servicing Your Honda...
  • Page 53 However, if you allow a youngster to perform or assist in any maintenance task, such as filling the tank with gasoline, you should provide close supervision to make sure that it is performed safely. Servicing Your Honda...
  • Page 54 Always follow the procedures and precautions in this owner’s manual. Injury from moving parts. Do not run the engine unless instructed to do so. (cont’d) Servicing Your Honda...
  • Page 55 To ensure the best • To help prevent the motorcycle from falling quality and reliability, use only new Honda over, park it on a firm, level surface, using Genuine Parts or their equivalents for repair the side stand or a maintenance stand to and replacement.
  • Page 56 If you do not feel capable of performing a given task or need assistance, remember that your The Maintenance Schedule also includes Honda dealer knows your motorcycle best and items that involve more extensive procedures is fully equipped to maintain and repair it.
  • Page 57 Refer to the C: clean official Honda Service Manual (page 162). **In the interest of safety, we recommend these A: adjust items be serviced only by your dealer.
  • Page 58 * Should be serviced by your dealer, unless the owner has the proper tools and service data and is mechanically qualified. Refer to the official Honda Service Manual (page 162). ** In the interest of safety, we recommend these items be serviced only by your dealer.
  • Page 59 * Should be serviced by your dealer, unless the owner has the proper tools and service data and is mechanically qualified. Refer to the official Honda Service Manual (page 162). ** In the interest of safety, we recommend these items be serviced only by your dealer.
  • Page 60 Notes 600 (1,000) or 6 1,200 (2,000) or 12 1,800 (3,000) or 18 2,400 (4,000) or 24 3,000 (5,000) or 30 3,600 (6,000) or 36 4,200 (7,000) or 42 4,800 (8,000) or 48 5,400 (9,000) or 54 Servicing Your Honda...

  • Page 61: Maintenance Component Locations

    Maintenance Component Locations clutch lever front brake fluid reservoir front brake lever fuel fill cap throttle grip Servicing Your Honda...
  • Page 62 Maintenance Component Locations spark plug spark arrester rear brake engine oil fill cap/dipstick pedal Servicing Your Honda...
  • Page 63 Maintenance Component Locations battery air cleaner main fuse sub fuse crankcase side stand breather tube front brake caliper engine oil drain bolt drive chain Servicing Your Honda...

  • Page 64: Tools

    Refer to Safety Precautions on page 45. The spoke wrench is delivered with your motorcycle for tightening or loosening the spokes (USA only). You will need to provide your own tools to perform any owner maintenance. (1) spoke wrench Servicing Your Honda...

  • Page 65: Seat Removal

    (5) and the rear prong (6) into the rear recess (7). 2. Install the collars onto the bolts. Tighten the bolts securely. (1) seat (4) front recess (2) bolts (5) front prong (3) collars (6) rear prong (7) rear recess Servicing Your Honda...

  • Page 66: Left Side Cover Removal

    3. Install the collar onto the bolt B. 4. Install the bolt B and bolt A and tighten them securely. (1) left side cover (6) grommet (2) bolt A (7) boss (3) bolt B (8) hole (4) collar (9) tab (5) prong Servicing Your Honda...

  • Page 67: Fuel

    If pinging or spark knock persists, consult your dealer. Type unleaded Use only unleaded fuel in your Honda. If you Pump Octane Number 86 (or higher) ride your Honda in a country where leaded fuel might be available, take precautions to use only Your engine is designed to use any unleaded unleaded fuel.
  • Page 68 • Stop the engine and keep heat, sparks and flame away. • Handle fuel only outdoors. (1) fuel fill cap (3) steering stem nut • Wipe up spills immediately. (2) breather tube (4) lower edge of filler neck (cont’d) Servicing Your Honda...
  • Page 69 3. After refueling, turn the fuel fill cap clockwise until it clicks. 4. Insert the breather tube in the steering stem nut. If you replace the fuel fill cap, use a Honda Genuine replacement part or equivalent. Servicing Your Honda...

  • Page 70: Engine Oil

    Running the engine with insufficient oil can viscosity SAE 10W-30 cause serious damage to the engine and (weight) transmission. JASO T 903 standard Pro Honda GN4 4-stroke oil suggested oil (USA & Canada), or Honda 4-stroke oil, or an equivalent motorcycle oil (cont’d) Servicing Your Honda...
  • Page 71 • Do not use API SJ or higher oils displaying a circular API service label. circular API ‘‘energy conserving’’ or ‘‘resource conserving’’ service label on the container. They may affect lubrication and clutch performance. RECOMMENDED RECOMMENDED • Do not use non-detergent, vegetable, or castor based racing oils. Servicing Your Honda...
  • Page 72 4-stroke motorcycle engines. There are two classes: MA and MB. Oil conforming to the standard is labeled on the oil container. For example, the following label shows the MA classification. (1) oil code (2) oil classification Servicing Your Honda...
  • Page 73 (1) oil fill cap/dipstick (3) lower level mark tightly. (2) upper level mark 9. Check for oil leaks. 1. Park your motorcycle on a firm, level surface. 2. Clean around the oil fill cap/dipstick (1) and nearby surfaces. Servicing Your Honda...
  • Page 74 5. Pour the drained oil into a suitable container and dispose of it in an approved manner (page 127). Improper disposal of drained fluids is harmful to the environment. (1) oil drain bolt (2) sealing washer (cont’d) Servicing Your Honda...
  • Page 75 7. Pour the recommended oil into the 11. Check for oil leaks. crankcase, approximately: 0.9 US qt (0.85 ) 8. Install the oil fill cap/dipstick securely. 9. Start the engine and let it idle for 3-5 minutes. Stop the engine. Wait 2-3 minutes. Servicing Your Honda...

  • Page 76: Air Cleaner

    Your motorcycle’s air cleaner has very specific premature engine wear. performance requirements. Use a new Honda Genuine air cleaner specified for your model or an air cleaner of equal quality. Servicing Your Honda...
  • Page 77 3. Unhook the set spring (3), take care to avoid bending the set spring and set spring holder (4). 4. Remove the air cleaner (5). (1) retainer clips (2) air cleaner housing cover (3) set spring (4) set spring holder (5) air cleaner Servicing Your Honda...
  • Page 78 8. Allow the air cleaner to dry thoroughly before applying oil. A wet air cleaner will not fully absorb the oil. (5) air cleaner (7) tabs (6) air cleaner holder (8) air cleaner holes (cont’d) Servicing Your Honda...
  • Page 79 Air Cleaner 9. Pour clean Pro Honda Foam Filter Oil or an 14.Install the air cleaner housing cover and set equivalent (Canada: Honda Foam Filter Oil the retainer clips. or an equivalent) over the entire surface of 15.Install the left side cover (page 57).

  • Page 80: Crankcase Breather

    4. Install the crankcase breather tube. If the drain tube overflows, the air filter may become contaminated with engine oil causing poor engine performance. LEFT SIDE (1) crankcase breather tube Servicing Your Honda...

  • Page 81: Throttle

    (–) If you can’t get the freeplay within the specified range, contact your dealer. (2) rubber dust cover (+) increase freeplay (3) lock nut (–) decrease freeplay (4) adjuster Servicing Your Honda...
  • Page 82 5. Lubricate the cables with a commercially available cable lubricant to prevent premature rust and corrosion. (1) throttle (2) throttle cables 1. Check that the throttle assembly is positioned properly and the securing bolts are tight. Servicing Your Honda...

  • Page 83: Clutch System

    1. Pull the rubber dust cover (2) back. If necessary, adjust to the specified range. 2. Loosen the minor lock nut (3). Improper freeplay adjustment can cause 3. Turn the minor clutch cable adjuster (4) to premature clutch wear. obtain the specified freeplay. Servicing Your Honda...
  • Page 84 4. Turn the major adjusting nut to obtain the obtained. specified freeplay. LEFT SIDE 5. Hold the major adjusting nut and tighten the major lock nut. Check the adjustment. (–) (cont’d) (5) major adjusting nut (+) increase freeplay (6) major lock nut (–) decrease freeplay Servicing Your Honda...
  • Page 85 • Lubricate the clutch cable with a kinked or worn, or the clutch discs may be commercially available cable lubricant to worn. See your dealer or refer to the official prevent premature wear and corrosion. Honda Service Manual (page 162). Servicing Your Honda...

  • Page 86: Spark Plug

    Spark Plug Recommendation Using spark plugs with an improper heat range can cause engine damage. The recommended standard spark plug is satisfactory for most riding conditions. Standard CPR6EA-9 (NGK) (1) center electrode (2) side electrode (3) spark plug gap Servicing Your Honda...
  • Page 87 6. With the plug washer attached, thread the 8. Reinstall the spark plug cap. Take care to spark plug in by hand (to prevent cross- avoid pinching any cables or wires. threading). Servicing Your Honda...

  • Page 88: Spark Arrester

    (1) bolts (3) gasket (2) spark arrester (4) muffler 1. Allow the engine and muffler to cool. 2. Remove the bolts (1), the spark arrester (2), and the gasket (3) from the muffler (4). (cont’d) Servicing Your Honda...
  • Page 89 7 lbf·ft (10 N·m , 1.0 kgf·m) The spark arrester must be free of breaks and holes. Replace, if necessary. (5) spark arrester screen Servicing Your Honda...

  • Page 90: Suspension

    1. Check fork operation. Pull the front brake lever in, to lock the brake. Then, pump up and down on the fork legs several times. The suspension should function smoothly. There should be no oil leakage. (cont’d) Servicing Your Honda...
  • Page 91 1. Place the motorcycle on a maintenance stand. Push hard against the side of the rear wheel and feel for any freeplay which indicates worn swingarm bearings (1). (1) swingarm bearing (2) shock absorber attachment points (3) suspension linkage attachment points Servicing Your Honda...
  • Page 92 (2) and rear suspension linkage attachment points (3) are secure. 3. Check for oil leaks in the shock absorber. If any rear suspension components appear worn or damaged, see your dealer for further inspection. Servicing Your Honda...

  • Page 93: Brakes

    (2) lock nut (4) adjuster the air bled from the system. Never use adjusters other than those designed for this motorcycle. Install a new adjuster from the lever side with the lock nut under the head of the adjuster. Servicing Your Honda...
  • Page 94 If brake lever freeplay is not within this range, check the fluid level. see your dealer. It should be above the LWR mark (1). If the level is at or below the LWR mark, check the brake pads for wear (page 87). (cont’d) Servicing Your Honda...
  • Page 95 • Check for deterioration or cracks in the hoses and fittings. The recommended brake fluid is Honda DOT 3 or DOT 4 brake fluid from a sealed container, or an equivalent. Brake fluid can damage plastic and painted surfaces.
  • Page 96 More About: Brake Fluid Brake fluid should be added and replaced by your dealer. The recommended brake fluid is Honda DOT 3 or DOT 4 Brake Fluid, or any brake fluid of equal quality and performance. Use fresh brake (1) front brake caliper fluid from a sealed container.
  • Page 97 1. Place your motorcycle on its side stand. 2. Check freeplay by slowly depressing the rear brake pedal (1) until the brake starts to RIGHT SIDE engage. Freeplay: 3/8–13/16 in (10–20 mm) If necessary, adjust to the specified range. (1) rear brake pedal Servicing Your Honda...
  • Page 98 (3). (3) brake arm pin 2. Apply the brake, release it, and then spin the After adjustment, confirm the freeplay of the wheel and check that it rotates freely. Repeat this procedure several times. brake pedal. Servicing Your Honda...
  • Page 99 If replacement is necessary, see your control (pedal) causes the arrow on the brake dealer. arm to move toward a reference mark on the brake panel. RIGHT REAR (1) arrow (3) reference mark (2) brake arm (4) brake panel Servicing Your Honda...
  • Page 100 • Make sure the rear brake rod, brake arm, spring, and fasteners are in good condition. (1) lock nut (2) stopper bolt 1. Loosen the lock nut (1) and turn the stopper bolt (2). 2. Tighten the lock nut. 3. Check the freeplay (page 88). Servicing Your Honda...

  • Page 101: Wheels

    Excessively loose spokes may result in instability at high speeds and the possible loss of control. Neglecting this maintenance may also cause rim or spoke damage. It’s also important that the rim lock is secure to prevent tire slippage. Servicing Your Honda...
  • Page 102 3. Rotate the wheel slowly to see if it appears to REAR ‘‘wobble.’’ If it does, the rim is out of round or not ‘‘true.’’ If the wobble is noticeable, see your dealer for inspection. (1) wheel rim (2) spoke (3) rim lock Servicing Your Honda...
  • Page 103 See your dealer for this service. Avoid getting grease, oil, or dirt on the disc or pad surfaces. Any contamination can cause poor brake performance or rapid pad wear after reassembly. (1) axle nut (2) axle shaft Servicing Your Honda...
  • Page 104 Check front brake adjustment (page 84). If a torque wrench was not used to install the wheel, see your dealer as soon as possible to verify proper assembly. Improper assembly may lead to loss of braking capacity. Servicing Your Honda...
  • Page 105 This can cause poor brake performance or rapid brake shoe wear after reassembly. (5) adjusting nuts (1) adjuster (6) rear axle nut (2) brake rod (7) rear axle shaft (3) brake arm (4) lock nuts Servicing Your Honda...
  • Page 106 If a torque wrench was not used to install the wheel, see your dealer as soon as possible to verify proper assembly. Improper assembly may lead to loss of braking capacity. (8) lug (9) slot (10) brake panel Servicing Your Honda...

  • Page 107: Tires & Tubes

    Make sure the valve stem caps are secure. If necessary, install new caps. The following pages give detailed information on how and when to check your air pressure, how to inspect your tires for wear and damage, Servicing Your Honda...
  • Page 108 15 psi (100 kPa , 1.0 kgf/cm Rear 15 psi (100 kPa , 1.0 kgf/cm If you decide to adjust tire pressures for a particular riding condition, make changes a little at a time. (1) tread depth (cont’d) Servicing Your Honda...
  • Page 109 Replacing a tube requires removing and inside the tire or the tire is slipping on the reinstalling the wheel. Any time a tube is rim. See your dealer. replaced, carefully inspect the tire as described on page 99. Servicing Your Honda...
  • Page 110 • Have the wheel balanced after a new tire is killed. installed. • We recommend that tires be replaced by your Always use the size and type of tires dealer. recommended in this owner’ s manual. Servicing Your Honda...

  • Page 111: Side Stand

    2. Check the side stand assembly for freedom LEFT SIDE of movement. If the side stand is stiff or squeaky, clean the pivot area and lubricate the pivot bolt with clean engine oil. (1) side stand spring Servicing Your Honda...

  • Page 112: Drive Chain

    1. Check slack in the lower drive chain (1) run drive chain to perform the recommended midway between the sprockets. Drive chain service in the Maintenance Schedule. slack should allow the following vertical movement by hand: 1–1 3/8 in (25–35 mm) (cont’d) Servicing Your Honda...
  • Page 113 (2) chain slider (3) depth cannot be freed. Lubricate the drive chain Service Limit: 0.12 in (3 mm) (page 107) if it appears dry or shows signs of rust. Lubricate any kinked or binding links Servicing Your Honda...
  • Page 114 41 pins, from pin center to pin center. If the distance exceeds New Chain: 20.0 in (508 mm) the service limit, the drive chain is worn out Service Limit: 20.4 in (518 mm) and should be replaced. (cont’d) Servicing Your Honda...
  • Page 115 (5) graduated scale (3) adjusting nut 1. Loosen the rear axle nut (1). Use of a new chain with worn sprockets will 2. Loosen the lock nuts (2) on both sides of the cause rapid chain wear. swingarm. Servicing Your Honda...
  • Page 116 8. Check rear brake pedal freeplay and adjust as necessary (page 88). Freeplay is affected between the link plates, pins, bushings, and when repositioning the rear wheel to adjust rollers. drive chain slack. Recommended lubricant: Pro Honda HP Chain Lube or an equivalent Servicing Your Honda...
  • Page 117 3. Inspect the drive chain for possible wear or damage. Replace the drive chain if it has damaged rollers, loose fitting links, or otherwise appears unserviceable. Replacement chain: DID 428HD (1) master link retaining clip Servicing Your Honda...
  • Page 118 • You may find it easier to install a new chain retaining clip will face the direction of by connecting it to the old chain with a forward wheel rotation. master link and pulling the old chain to position the new chain on the sprockets. Servicing Your Honda...

  • Page 119: Battery

    If you have electrical accessories on your compounds. Wash hands after handling. motorcycle or do not ride frequently, we recommend that you charge the battery frequently (see Battery Charging, page 114). Servicing Your Honda...
  • Page 120 Wear protective clothing and a face shield, or have a skilled mechanic do You will get the best storage results from the battery maintenance. removing the battery and slow charging it every 30 days (see Battery Charging, page 114). Servicing Your Honda...
  • Page 121 5. Release the battery holder band (3) from the hook, then remove the battery (4) taking care not to drop the terminal nuts. (1) negative (–) terminal lead (2) positive (+) terminal lead (3) battery holder band (4) battery Servicing Your Honda...
  • Page 122 2. Check all bolts and other fasteners are sunlight. secure. 8. Clean the battery box after removing the battery for storage. 9. Slow charge the battery (see following section) once every 30 days. Servicing Your Honda...
  • Page 123 Battery We recommend using a charger (1) designed Battery Charging specifically for your Honda, which can be purchased from your dealer. These units can be Refer to Safety Precautions on page 45. left connected for long periods without risking damage to the battery. However, do not...

  • Page 124: Appearance Care

    Refer to Safety Precautions on page 45. General Recommendations Frequent cleaning and polishing will keep your Honda looking newer longer. Frequent cleaning • To clean your motorcycle, you may use: also identifies you as an owner who values your – water motorcycle.
  • Page 125 4. After washing, rinse your motorcycle • throttle body thoroughly with plenty of clean water to remove any residue. Detergent residue can corrode alloy parts. High pressure water (or air) can damage certain parts of your motorcycle. Servicing Your Honda...
  • Page 126 This will help exhaust pipe and muffler. If you are not sure if dry the brakes and restore normal braking your exhaust pipe and muffler are painted, performance. contact your dealer. Servicing Your Honda...
  • Page 127 This page intentionally left blank. Servicing Your Honda...

  • Page 128: Tips

    Here’s helpful advice on how to prepare for an Preparing for a Ride ........120 off-road adventure, how to transport and store Transporting Your Honda ......122 your Honda, and how to be an environmentally Storing Your Honda ........124 responsible motorcycle owner. You & the Environment ......126...

  • Page 129: Preparing For A Ride

    Preparing for a Ride A safe and enjoyable ride begins with good What to Take to the Riding Area planning and preparation. Always ride with at least one other person in case you have trouble, Along with your motorcycle and riding gear, and let someone know where you’re going and you should take along some tools and when you expect to return.
  • Page 130 Preparing for a Ride For safety, all refueling should be done at a gas If you decide to take some tools, spare parts, or station on the way to the riding area or at your other supplies on the trail, be sure you can carry base camp.

  • Page 131: Transporting Your Honda

    Transporting Your Honda If you use a truck or motorcycle trailer to transport your Honda, we recommend that you follow these guidelines: • Use a loading ramp. • Secure the motorcycle in an upright position, using motorcycle tie-down straps. Avoid using rope, which can loosen and allow the motorcycle to fall over.
  • Page 132 Transporting Your Honda Check that the tie-down straps do not contact any control cables or electrical wiring. Tighten both straps until the front suspension is compressed about half-way. Too much pressure is unnecessary and could damage the fork seals. Use another tie-down strap to keep the rear of the motorcycle from moving.

  • Page 133: Storing Your Honda

    If you won’t be riding for an extended period, For more information about storage, refer to the such as during the winter, thoroughly inspect Honda Winter Storage Guide, available from your motorcycle and correct any problem your dealer (USA only).
  • Page 134 Storing Your Honda Preparation for Storage Removal from Storage 1. Change the engine oil (page 65). 1. Uncover and clean your motorcycle. 2. Fill the fuel tank. Make sure the fuel fill cap 2. If your motorcycle has been stored for more is properly installed.

  • Page 135: You & The Environment

    You & the Environment Owning and riding a motorcycle can be • Choose Sensible Cleaners. Use a enjoyable, but you must do your part to protect biodegradable detergent when you wash your nature. When you show respect for the land, motorcycle.
  • Page 136 You & the Environment • Recycle Wastes. It’s illegal and thoughtless to put used engine oil in the trash, down a drain, or on the ground. Used oil, gasoline, and cleaning solvents contain poisons that can hurt refuse workers and contaminate our drinking water, lakes, rivers, and oceans.
  • Page 137 This page intentionally left blank. Tips...

  • Page 138: Taking Care Of The Unexpected

    Taking Care of the Unexpected With all the challenges you can encounter off- General Guidelines........130 road, there’s a chance that sometime something If Your Engine Quits or Won’t Start...131 may go wrong. This section gives practical If You Have a Flat Tire .......135 advice to help you deal with a wide range of If a Fuse Blows ...........136 problems.

  • Page 139: General Guidelines

    Taking Care of the Unexpected If a problem is relatively minor and you have General Guidelines the tools, supplies, and skills to make a permanent repair, you may be able to fix it on If something goes wrong during a ride, the first the trail and continue riding.

  • Page 140: If Your Engine Quits Or Won't Start

    Taking Care of the Unexpected • If the problem is relatively minor and you If you have a problem starting the engine – or have the tools, supplies, and skills to make a experience poor engine performance – the temporary repair, be sure to have permanent following information may help you.
  • Page 141 Taking Care of the Unexpected SYMPTOM: Starter motor doesn’t operate. POSSIBLE CAUSE WHAT TO DO ignition switch OFF Turn the ignition switch ON. transmission not in neutral Shift into neutral. blown fuse Replace with a new fuse of the same rating (page 136). battery lead loose Tighten the battery lead.
  • Page 142 Taking Care of the Unexpected SYMPTOM: Starter motor works, but the engine won’t start. POSSIBLE CAUSE WHAT TO DO out of fuel Fill the fuel tank. flooded engine See Flooded Engine (page 33). loose or unconnected Install the spark plug cap securely. If the engine still spark plug cap won’t start, see your dealer.
  • Page 143 Taking Care of the Unexpected SYMPTOM: Engine starts, but runs poorly. (cont’d) POSSIBLE CAUSE WHAT TO DO sooty exhaust (rich fuel See your dealer. mixture) detonates or pings under If applicable, switch to the recommended octane gasoline load (page 58) or change your brand of gasoline. If the problem persists, see your dealer.

  • Page 144: If You Have A Flat Tire

    Taking Care of the Unexpected If the leak is more serious, or a temporary If You Have a Flat Tire repair doesn’t hold, the tube must be replaced. The tire will also need to be replaced if it is How you handle a flat tire on the trail depends damaged (page 101).

  • Page 145: If A Fuse Blows

    Taking Care of the Unexpected If you are unable to repair a flat tire on the trail, If a Fuse Blows you will need to push the motorcycle back to your base or send for help. We strongly All of the electrical circuits on your motorcycle recommend that you do not try to ride with a have fuses to protect them from damage caused flat tire.
  • Page 146 Taking Care of the Unexpected The main fuse is located under the seat. 7. Install the starter magnetic switch. 8. Install the seat. The sub fuse is located behind the left side cover. UNDER SEAT Recommended Fuses main fuse 15 A sub fuse 1.
  • Page 147 Taking Care of the Unexpected Sub Fuse Access: 9. For access the sub fuse (7), remove the left side cover (page 57). (10) 10. Open the fuse case cover (8) and pull the sub fuse out. If the fuse is blown (9), replace it with the spare fuse (10).

  • Page 148: If You Crash

    Taking Care of the Unexpected If there is minor damage, or you are unsure If You Crash about possible damage but decide to try riding the motorcycle back to your base, ride slowly Personal safety is your first priority after a and cautiously.

  • Page 149: If You Lose Your Key

    If you don’t know your key number, call the dealer where you purchased your Honda. They may have it listed in their records. If they don’t, transport your motorcycle to them or the nearest dealer.

  • Page 150: If A Component Fails

    Taking Care of the Unexpected • If any component of the front brake system is If a Component Fails damaged, you may be able to ride carefully back to your base using the rear brake for The drive chain, master link, brake lever or slowing or stopping.

  • Page 151: If Your Battery Is Low (Or Dead)

    Taking Care of the Unexpected If Your Battery Is Low (or Dead) Jump starting is not recommended, especially if you use an automobile battery. The greater amperage of an automobile battery when the car engine is running can damage your motorcycle’s electrical system.

  • Page 152: If Unstable Engine Operation Occurs Intermittently

    Taking Care of the Unexpected If Unstable Engine Operation Occurs Intermittently If the fuel pump filter is clogged, unstable engine operation will occur intermittently while riding. Even if this symptom occurs, you can continue to ride your motorcycle. If unstable engine operation occurs even if sufficient fuel is available, have your motorcycle inspected by your dealer as soon as possible.
  • Page 153 This page intentionally left blank. Taking Care of the Unexpected...

  • Page 154: Technical Information

    Technical Information This section contains dimensions, capacities, Vehicle Identification........146 and other technical data, plus information on Specifications ..........148 government requirements and how to break-in Break-in Guidelines ........153 your motorcycle. Emission Control Systems ......154 Oxygenated Fuels........158 Technical Information...

  • Page 155: Vehicle Identification

    Vehicle Identification LEFT SIDE Serial Numbers The VIN and engine serial number are required when you register your motorcycle. They may also be required when ordering replacement parts. You may record these numbers in the Quick Reference section at the rear of the manual.
  • Page 156 Vehicle Identification The engine number (2) is stamped on the left LEFT SIDE side of the engine. (2) engine number Technical Information...

  • Page 157: Specifications

    Specifications Dimensions Fuel & Lubricants Overall length CRF125F: Fuel tank capacity 0.98 US gal (3.7 ) 69.7 in (1,770 mm) Fuel unleaded gasoline, CRF125FB: recommendation pump octane number 73.0 in (1,855 mm) of 86 or higher Overall width CRF125F: Engine oil capacity after draining: 29.1 in (740 mm) 0.9 US qt (0.85 )
  • Page 158 Specifications Fuel & Lubricants Fuel & Lubricants Engine oil API Service Air cleaner oil Pro Honda (USA only) recommendation Classification SJ or or Honda Foam Filter higher except oils Oil or an equivalent labeled as energy conserving or Capacities resource conserving Passenger capacity operator only;...
  • Page 159 Specifications Engine Specifications Power Transmission Valve clearance Intake: 0.004 ± 0.001 in Primary reduction 3.250 (cold) (0.10 ± 0.02 mm) Gear ratio, 1st 3.181 Exhaust:0.006 ± 0.001 in 1.705 (0.15 ± 0.02 mm) 1.238 Spark plug CPR6EA-9 (NGK) 0.916 (standard) Final reduction CRF125F: 3.538 0.031- 0.035 in...
  • Page 160 Specifications Chassis & Suspension Chassis & Suspension Caster 27° 30' Tire type bias-ply, tube Trail CRF125F: Tire pressure, 15 psi (100 kPa, 1.0 kgf/cm 3.2 in (81 mm) front (cold) CRF125FB: Tire pressure, 15 psi (100 kPa, 1.0 kgf/cm 3.7 in (94 mm) rear (cold) Tire size, CRF125F:...
  • Page 161 Specifications Electrical Torque Specifications Battery YTZ4V Oil drain bolt 18 lbf·ft 12 V–3.0 Ah (10HR) (24 N·m, 2.4 kgf·m) Generator 0.125 kW/5,000 rpm Spark arrester 7 lbf·ft mount bolts (10 N·m, 1.0 kgf·m) Front axle nut 46 lbf·ft Fuse (62 N·m, 6.3 kgf·m) Main 15 A Rear axle nut...

  • Page 162: Break-In Guidelines

    Break-in Guidelines Help assure your motorcycle’s future reliability and performance by paying extra attention to how you ride during the first operating day or 15 miles (25 km). During this period, avoid full-throttle starts and rapid acceleration. Technical Information...

  • Page 163: Emission Control Systems

    Emission Control Systems Exhaust Emission Requirements Noise Emission Requirements The U.S. Environmental Protection Agency The EPA also requires that motorcycles built (EPA), the California Air Resources Board after January 1, 1983 comply with applicable (CARB), and Environment and Climate noise emission standards for one year or Change Canada (ECCC) require that your 1,865 miles (3,000 km) after the time of sale to motorcycle comply with applicable exhaust...
  • Page 164 Models sold in and used in California: the same way, but it is toxic. An add-on or modified part must be compliant Honda Motor Co., Ltd. utilizes various systems with applicable ARB evaporative emission to reduce carbon monoxide, oxides of nitrogen control standards.
  • Page 165 Emission Control Systems Noise Emission Control System AMONG THOSE ACTS PRESUMED TO TAMPERING WITH THE NOISE CONTROL CONSTITUTE TAMPERING ARE THE SYSTEM IS PROHIBITED: U. S. federal law ACTS LISTED BELOW: prohibits, or Canadian provincial laws may • Removal of, or puncturing the muffler, prohibit the following acts or the causing baffles, header pipes, or any other component thereof: (1) The removal or rendering...
  • Page 166 Honda Motorcycle Dealer: vehicle is to be used for competition only. 1. Hard starting or stalling after starting 2.

  • Page 167: Oxygenated Fuels

    Oxygenated Fuels Some conventional gasolines are being blended ETHANOL (ethyl or grain alcohol) up to 10% with alcohol or an ether compound. These by volume. gasolines are collectively referred to as You may use gasoline containing up to 10% oxygenated fuels. To meet clean air standards, ethanol by volume.
  • Page 168 Oxygenated Fuels If you notice any undesirable operating symptoms, try another service station or switch Oxygenated fuels can damage paint and to another brand of gasoline. plastic. Damage caused by spilled fuel is not Fuel system damage or performance problems covered under warranty.
  • Page 169 This page intentionally left blank. Technical Information...

  • Page 170: Consumer Information

    Consumer Information This section contains information on your Authorized Manuals ........162 warranty and how to get an official Honda Warranty Coverage ........164 service manual. Warranty Service.........165 Contacting Honda ........166 Your Honda Dealer ........168 Consumer Information...

  • Page 171: Authorized Manuals

    Authorized Manuals The Service Manual used by your authorized dealer is available from your Honda dealer or Helm, Inc. (USA only, Canada: See your dealer to order authorized manuals.) Also available, but not necessary to service your model, is the Honda Common Service Manual, which explains basic service information for various systems on Honda motorcycles, scooters, ATV, and SxS.
  • Page 172 Authorized Manuals Order online: www.helminc.com Order Toll Free: 1-888-CYCLE93 (1-888-292-5393) (NOTE: For Credit Card Orders Only) Monday – Friday 8:00 AM – 6:00 PM EST Consumer Information...

  • Page 173: Warranty Coverage

    Honda Motorcycle Warranties Booklet However, you should have the proper tools and that was provided to you by your Honda dealer. service information and be mechanically Please read this booklet and be aware of the qualified.

  • Page 174: Warranty Service

    If the problem If you believe you have a problem with your has already been reviewed with the Service Honda, call the service department of your Manager, Parts Manager, Sales Manager, etc., dealer. Make an appointment for an inspection contact the Owner of the dealership or his and diagnosis.

  • Page 175: Contacting Honda

    PHONE differences at the dealership level. Telephone: (866) 784-1870 If you wish to contact Honda directly to comment on your experiences with your Honda ONLINE CUSTOMER SERVICE or with your dealer, please send your comments using one of the following methods: Website: https://powersports.honda.com/contact-us...
  • Page 176 Contacting Honda Canada: Honda Canada Inc., Customer Relations Dept, 180 Honda Boulevard, Markham, Ontario L6C 0H9, telephone: (888) 946-6329, facsimile: (877) 939-0909. E-mail: honda_cr@ch.honda.com Please include the following information in your letter: • name, address, and telephone number • product model, year, and VIN •...

  • Page 177: Your Honda Dealer

    (USA only), and Honda accessories and your Honda. products (Canada only). The same quality that went into your Honda can be found in Honda Genuine replacement parts. You’ll also find comparable quality in the accessories and products available from the parts department.

  • Page 178: Index

    Index accessories ............ 10 capacity, fuel ..........59 air cleaner ............. 67 cleaner, air ............ 67 air pressure, tires ........... 98 cleaning, appearance care ......115 altering your motorcycle ......11 clutch system, arrester, spark ..........79 adjustment ..........74 authorized manuals ........
  • Page 179 Index Index education, rider ........3 flat tire ............135 emission control systems ......154 flooded engine, starting ........ 33 emission requirements ........ 154 fork ............... 81 engine number ..........147 front brake, engine stop switch ........18 lever ............18 engine, lever freeplay .........
  • Page 180 ............. 19 gasoline ............58 gears, shifting ..........34 left side cover removal ......... 57 lever, Honda service manual ........ 162 clutch ............. 19 Honda, contacting ........166 front brake ..........18 shift ............19 limit, weight ........... 9 loading ............
  • Page 181 Index Index maintenance, parking ............38 component locations ......52 pedal, rear brake ........... 19 record ............. 51 pgm-fi malfunction indicator lamp (MIL) ... 20 safety ............45 pinging, engine ..........58 schedule ..........47 plug, spark ............ 77 manual, service ........... 162 post-ride inspection ........
  • Page 182 Index Index suspension, front ............81 rear ............82 schedule, maintenance ........47 service, customer ..........166 manuals ..........162 throttle warranty ..........165 freeplay ..........72 shifting gears ..........34 operation ..........18 shoe, brake ............ 90 tires, side stand ..........20 air pressure ..........
  • Page 183 Index vehicle identification no. (VIN) ....146 warranty, coverage ..........164 extended ..........164 service ..........165 washing your motorcycle ......116 weight limit ............ 9 wheels ............92 Index...
  • Page 184 Memo...
  • Page 185 Memo...
  • Page 186 Frequent causes of costly chassis repair are: collection of information you need to know • Chain -- A loosely adjusted chain or a chain about your Honda. You’ll also find space to stretched because of lack of lubrication may record important notes.
  • Page 187 Quick Reference Record important information here: Engine No. Owner’s: Name Address City/State Phone Dealer’s: Name Address City/State Phone Service Mgr. Quick Reference...
  • Page 188 API Service Classification SJ or higher except oils labeled as energy conserving or resource conserving on the circular API service label, SAE 10W-30, JASO T 903 standard MA, Pro Honda GN4 4-stroke oil (USA & Canada), or Honda 4-stroke oil, or an equivalent motorcycle oil after draining: 0.9 US qt (0.85 )
  • Page 189 Quick Reference These symbols are used in Operating Controls section: SYMBOL COMPONENT SEE PAGE ON – ignition switch OFF – ignition switch START button RUN – engine stop switch STOP – engine stop switch PGM-FI malfunction indicator lamp (MIL) fuel reserve indicator Ignition indicator Quick Reference...
  • Page 190 California Proposition 65 Warning WARNING: Operating, servicing and maintaining a passenger vehicle or off-highway motor vehicle can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm.
  • Page 191 31K28B90 © 2022 Honda Motor Co., Ltd. 00X31-K28-B900 Printed in the U.S.A. All Rights Reserved...

This manual is also suitable for:

Crf125fb 2023

Table of Contents