Dtc 68-1 (No.1 Clutch Operation Malfunction; Clutch Slips); Dtc 69-1 (No.2 Clutch Operation Malfunction; Clutch Slips) - Honda CRF1000 Shop Manual

dummyhead dummyhead
3. VS Sensor Condition Inspection
Remove the VS sensor (page 4-42).
Check the VS sensor for damage or contaminated.
Is the VS sensor in good condition?
YES
NO
DTC 68-1 (No.1 CLUTCH OPERATION
MALFUNCTION; CLUTCH SLIPS)
1. DTC Recheck
Erase the DTC (page 13-9).
Test-ride the motorcycle above 20 km/h (12 mph)
for more than 20 seconds.
Stop the engine.
Check the DTC with the MCS.
Is DTC 11-1 indicated?
YES
NO
2. Clutch Condition Inspection
Disassemble and check the No.1 clutch assembly
(page 13-63).
Is the No.1 clutch in good condition?
YES
NO
DTC 69-1 (No.2 CLUTCH OPERATION
MALFUNCTION; CLUTCH SLIPS)
1. DTC Recheck
Erase the DTC (page 13-9).
Test-ride the motorcycle above 20 km/h (12 mph)
for more than 20 seconds.
Stop the engine.
Check the DTC with the MCS.
Is DTC 11-1 indicated?
YES
NO
2. Clutch Condition Inspection
Disassemble and check the No.2 clutch assembly
(page 13-63).
Is the No.2 clutch in good condition?
YES
NO
DUAL CLUTCH TRANSMISSION (DCT) (CRF1000D)
– Replace the PCM with a known good one
(page 4-39) and recheck.
– Replace the VS sensor with a known good
one and recheck.
– Refer to DTC 11-1 troubleshooting (page
4-21).
– GO TO STEP 2.
– Replace the PCM with a known good one
(page 4-39) and recheck.
– Replace the faulty part.
– Refer to DTC 11-1 troubleshooting (page
4-21).
– GO TO STEP 2.
– Replace the PCM with a known good one
(page 4-39) and recheck.
– Replace the faulty part.
13-47