Flywheel Inspection; Flywheel Installation - Honda CRF1000 Shop Manual

dummyhead dummyhead
ALTERNATOR/STARTER CLUTCH
Remove the flywheel [1] using the special tool.
TOOL:
Rotor puller [2]
Remove the needle bearing [1].
Remove the woodruff key [2].
• Be careful not to damage the key groove and
crankshaft.
INSPECTION
Inspect the following parts for scratch, damage,
abnormal wear, or deformation.
– Starter reduction gear shaft
– Starter reduction gear
– Woodruff key
– Needle bearing
Replace if necessary.
INSTALLATION
Install the woodruff key [1].
• Be careful not to damage the key groove and
crankshaft.
Apply engine oil to the needle bearing rotating area.
Install the needle bearing [2].
11-8
[1]
07733-0020001
[1]
[2]
[2]
[2]
[1]