Dual Clutch/Primary Driven Gear Assembly - Honda CRF1000 Shop Manual

dummyhead dummyhead
DUAL CLUTCH TRANSMISSION (DCT) (CRF1000D)
ASSEMBLY
CLUTCH DISCS (3 pcs)
END PLATE
SNAP RING
SNAP RING
WAVE SPRING
RETURN SPRING RETAINER
Clean the inner surface of the clutch guide thoroughly
and blow through the oil holes.
Coat new O-rings [1] with engine oil and install them
into the clutch guide and piston grooves.
Place the piston [2] into the clutch guide [3].
Push the piston in the clutch guide to ensure proper
seating.
13-66
CLUTCH PLATES A (2 pcs)
RETURN SPRING
O-RING
CLUTCH PLATE B
NEEDLE
BEARING
O-RINGS
O-RINGS
CLUTCH GUIDE
CLUTCH PISTON
[2]
[3]
PRIMARY DRIVEN GEAR
[1]