Cli Commands For Snmp - Comtrol ES7506 User Manual

CLI Commands for SNMP

The following table provides detailed information about command lines for SNMP configuration.
Feature
SNMP Community
Switch(config)# snmp-server community public ro
Read Only Community
community string add ok
Read Write Switch(config)# snmp-server community private rw
Community
community string add ok
SNMP Trap
Switch(config)# snmp-server enable trap
Enable Trap
Set SNMP trap enable ok.
SNMP Trap Server IP
Switch(config)# snmp-server host 192.168.250.33
without specific
SNMP trap host add OK.
community name
Switch(config)# snmp-server host 192.168.250.33 version 1 private
SNMP Trap Server IP
SNMP trap host add OK.
with version 1 and
community
Note: Private is the community name, version 1 is the SNMP version.
SNMP Trap Server IP
Switch(config)# snmp-server host 192.168.250.33 version 2 private
with version 2 and
SNMP trap host add OK.
community
Switch(config)# no snmp-server enable trap
Disable SNMP Trap
Set SNMP trap disable ok.
Switch# sh snmp-server trap
SNMP trap: Enabled
SNMP trap community: public
Switch# show running-config
Display
.......
snmp-server community public ro
snmp-server community private rw
snmp-server enable trap
snmp-server host 192.168.250.33 version 2 admin
snmp-server host 192.168.250.33 version 1 admin
........
CLI Commands for SNMP
Command Line
RocketLinx ES7506 User Guide: 2000529 Rev. E - 85
CLI Commands for SNMP