Cli Commands For Snmp - Comtrol RocketLinx ES7528 User Manual

CLI Commands for SNMP

CLI Commands for SNMP
The following table provides detailed information about command lines for SNMP configuration.
Feature
SNMP Community
Read Only Community Switch(config)# snmp-server community public ro
community string add ok
Read Write
Switch(config)# snmp-server community private rw
Community
community string add ok
SNMP Trap
Enable Trap
Switch(config)# snmp-server enable trap
Set SNMP trap enable ok.
SNMP Trap Server IP
Switch(config)# snmp-server host 192.168.250.33
without specific
SNMP trap host add OK.
community name
SNMP Trap Server IP
Switch(config)# snmp-server host 192.168.250.33 version 1 private
with version 1 and
SNMP trap host add OK.
community
Note: Private is the community name, version 1 is the SNMP version.
SNMP Trap Server IP
Switch(config)# snmp-server host 192.168.250.33 version 2 private
with version 2 and
SNMP trap host add OK.
community
Disable SNMP Trap
Switch(config)# no snmp-server enable trap
Set SNMP trap disable ok.
Display
Switch# sh snmp-server trap
SNMP trap: Enabled
SNMP trap community: public
Switch# show running-config
.......
snmp-server community public ro
snmp-server community private rw
snmp-server enable trap
snmp-server host 192.168.250.33 version 2 admin
snmp-server host 192.168.250.33 version 1 admin
........
104 - RocketLinx ES7528 Industrial Managed PoE Rack Mount User Guide: 2000509 Rev. A
Command Line
CLI Commands for SNMP