Testing The Current E-Mail Configuration - Quantum Scalar i6000 User Manual

Testing the Current
E-Mail Configuration
Quantum Scalar i6000 User's Guide
8 In the Sender Address text box, type an e-mail address for the
library (for example scalari6000@mycompany.com).
The library uses this address in the From field of e-mail messages
that it sends out, indicating the originator of the message. For
example, if you type scalari6000, the library appends the domain
information (for example, @mycompany.com). If you type
scalari6000@mycompany.com, the library does not append any
additional information.
9 To test the e-mail configuration, type an e-mail address in the
Recipient box of the Test Current Configuration area and click Test
email.
10 Confirm that the library displays a message indicating that the test
completed successfully and sends a test message to the specified e-
mail address.
The subject of the test message should be Test email from Scalar
i6000 and the message text should include the library name,
version, and serial number, along with the date and time that the
message was sent.
11 To finish, click OK.
To test the current e-mail configuration:
1 Log on as an administrator.
2 Make sure that you are viewing the physical library. From the View
menu, click the name of the physical library.
3 Click Setup > Email Configuration. The Email Configuration
dialog box appears.
4 Type an e-mail address in the Recipient box of the Test Current
Configuration area and click Test email.
5 Confirm that the library displays a message indicating that the test
completed successfully and sends a test message to the specified e-
mail address.
The subject of the test message should be Test email from Scalar
i6000 and the message text should include the library name,
version, and serial number, along with the date and time that the
message was sent.
Chapter 3: Configuring Your Library
Configuring E-mail
189