Working With Command History Logs - Quantum Scalar i6000 User Manual

Working With Command History Logs

Quantum Scalar i6000 User's Guide
Lighting Pattern
AMBER, solid
BLINKING GREEN
(3 sec ON, 1 sec OFF
BLINKING AMBER
(10 HZ frequency)
BLINKING (3 secs
AMBER, 1 sec GREEN)
10 Hz blinking pattern
The Command History Log dialog box enables you to view command
and response activity that has occurred with externally addressable
library devices, including the LMC, controller LUNs, partitions, and
drives. This information can help you isolate the source of an issue, such
as a library device or host application.
Chapter 2: Troubleshooting Your Library
Working With Command History Logs
Description
Tower is varied off, online or offline. Vary off
status trumps online/offline status display.
Note: It does not matter if the tower is
offline or offline if it is varied off or
being varied off.
Tower is varied on and UI takes the tower
offline
Tower door is opened while tower is still
varied on, or is currently in performing a
vary-on or vary-off operation before
completing the state transition, regardless
of being logically online or offline, hereby
interrupting tower motor control.
Aisle door opened while tower is varied on,
regardless of being logically online or
offline, hereby interrupting tower motor
control.
Note: If the tower was varied off before
the aisle power was interrupted, the
tower continues to display the vary
off blink pattern.
Tower identification initiated
115