Configuring Access To Stornext - Quantum Scalar i6000 User Manual

Quantum Scalar i6000 User's Guide
Configuring Access to
Certain licensed features (EDLM and Active Vault) can use an external
application to perform partition policies. To configure access to an
external application, you must first install an application programming
interface (API) client plug-in, and then configure the library to
communicate with the external application.
The API client plug-in is a Quantum-provided plug-in that allows the
library to communicate with a supported external application (such as
StorNext Storage Manager). The API client plug-in must be installed
before you can configure library access to the external application.
You can install as many API client plug-ins as necessary.
The same API client plug-in may be used for multiple features.
This chapter covers:
• Step 1: Confirming the External Application is Supported
page 420
• Step 2: Installing/Removing the Scalar i6000 API Client Plug-in
page 420
• Step 3: Configuring External Access
Chapter 11
StorNext
on page 422
on
on
419