Quantum Scalar i6000 User Manual page 578

Chapter 15: Maintaining Your Library
Maintenance Actions
Element
In the Drive(s) area:
Drive Type
drop-down list
State
Drive Type
Mode
Location
560
The following table describes the elements on the Drives dialog
box.
Description
Enables you to select the type of drives you want to list on the Drives dialog box
(for example, LTO1 for LTO-1 tape drives). All lists every drive in the library.
The state of the drive (Varied On, Varied Off, or Pending [if in transition]).
The type of drive (for example, LTO2 - FC).
The mode the drive is in: Online or Offline.
Online indicates all SCSI and host commands are accessible.
Offline indicates any move command is disabled.
The location of the drive by means of a coordinate system. For information
about location coordinates, see
page 459.
Understanding Location Coordinates
Quantum Scalar i6000 User's Guide
on