Quantum Scalar i6000 User Manual page 163

Quantum Scalar i6000 User's Guide
14 To assign a drive to the partition, select the appropriate check box.
You can identify a drive by its serial number and location
coordinates. For more information, see
Coordinates on page 459.
15 To continue, click Next. The Partitions - Step 5: Select Storage
Slots dialog box appears.
16 Storage slots are assigned by magazine. In the left column, select
the location of one or more storage magazines.
17 To assign a storage magazine, select the appropriate check box. You
can identify a magazine by its location coordinates. The number of
slots available is determined by the drive media type.
18 If this is a standard partition and you are using Automated Media
Pool (AMP), you can add logical element extensions to the partition
for possible later use. Type the number of magazines by which you
would like to extend the standard partition in the Magazine
Extensions field. For more information, see
Extensions in Standard Partitions
19 To continue, click Next. The Partitions - Step 6: Select I/E Slots
dialog box appears.
20 Select the location of one or more I/E station magazines.
Chapter 3: Configuring Your Library
Working With Partitions
Understanding Location
Create Magazine
on page 276.
145