Configure Amp Import Policies; Configure Amp Auto Export Policies - Quantum Scalar i6000 User Manual

Configure AMP Import
Policies
Configure AMP Auto
Export Policies
Quantum Scalar i6000 User's Guide
You can only configure import AMP policies on standard partitions (not
library managed partitions).
1 Click Setup > Partitions > Policies > Auto Import Configuration.
The Auto Import Configuration dialog appears.
2 For a specific partition, enter a range of barcode numbers in the
Enter Import Filter field. Multiple filters can be listed but must be
separated by a semi-colon.
3 Click OK.
Note: Import filters will be applied to the barcode label only. The
filters will not consider any media ID (e.g. L4, L5, etc) on the
barcode.
You can only configure export AMP policies on standard partitions (not
library managed partitions). However, this export function cannot be
performed from the user interface. Instead, any SCSI MOVE commands
performed on the standard partition to an assigned I/E elements will
Chapter 6: Automated Media Pool
Configure Automated Media Pool
277