Quantum Scalar i6000 User Manual page 459

Robotics Enabled indicator
Table 34 Robotics Enabled
Indicator
Indicator State and Explanation
Green Solid on — robotics are enabled and ready to process commands or are actively
processing commands from the library controller. No attention required. Do not open
the access door.
Blinking — a change of robotics state is pending, either from the enabled state to the
not enabled state or from the not enabled state to the enabled state. No attention
required. Do not open the access door.
Solid off — either robotics are not ready, the doors might be open, or the library
No color
might be powered off. Attention required. The operator should close the doors and
press the Robotics Enabled button to return robotics to the enabled state.
Table 35 Status Indicator
Indicator State and Explanation
Green Solid on — normal. No attention required.
Amber Blinking or solid on — fault. Attention required. Monitor the system status buttons.
To determine whether the library has created any tickets, click Tools > Tickets.
Quantum Scalar i6000 User's Guide
and button
The following tables describe the indicators in detail.
Status indicator
Chapter 13: Running Your Library
Operator Panel
Power button
and indicator
441