Quantum Scalar i6000 User Manual page 162

Chapter 3: Configuring Your Library
Working With Partitions
144
requires cleaning. For drive cleaning to function, you must first
configure drive cleaning for the library. For more information
about configuring drive cleaning, refer
Cleaning on page 227.
Note: Drive cleaning should be enabled for partitions only if
the host application does not support the coordination
of drive cleaning. If drive cleaning functionality is
enabled on the host application, do
automatic drive cleaning for any partitions in the
library.
11 If you are enabling Drive Cleaning for a partition containing HP
LTO-5 and higher drives, select the number of motion hours after
which the drive will recommend cleaning. Values include:
• 100 hours (default)
• 200 hours
• 400 hours
• 800 hours
• 1000 hours
12 To continue, click Next. The Partitions - Step 4: Select Drives dialog
box appears.
Note: If you are creating a library managed Automated Media
Pool (AMP) or Active Vault partition, this screen is skipped
because drives are not allowed in these partitions. Go to
Step 16.
Note: If you are creating an EDLM partition, only EDLM-capable
drives are shown.
13 In the left column, select the location of one or more drives.
Make sure that you select the appropriate module because the
library can have drives in the control module and any of the eleven
expansion modules.
Note: With the release of version i12, you can create partitions
that have zero (0) drives allocated.
Configuring Drive
not
enable
Quantum Scalar i6000 User's Guide