Quantum Scalar i6000 User Manual page 352

Chapter 9: Extended Data Lifecycle Management
Configuring EDLM
To...
Enable EDLM policies on a
partition
Modify existing EDLM policies
on a partition
334
3 Create, modify, or remove policies on a partition by doing one of
the following:
Do this...
1 Select the Enable radio button.
2 Select the check box of a partition in the table that has EDLM
policies disabled.
3 Proceed to Step
1 Select the Modify radio button.
2 Select the check box of a partition in the table that has EDLM
policies enabled.
3 Proceed to
Step
4.
4.
Quantum Scalar i6000 User's Guide