Using The Command Line Interface - Quantum Scalar i6000 User Manual

Quantum Scalar i6000 User's Guide
Using the Command Line
Customers as well as Technical Support personnel can access the library
using a command line interface (CLI). The CLI is fairly rudimentary and
only covers a small portion of the commands available on the library
user interface. The CLI is not intended to replace the GUI, but, rather, to
be an additional tool that can be used if desired.
This chapter covers:
• Logging on to the CLI
• Command Line Interface (CLI) Commands
• Initial Path on page 499
• Navigating Paths
• Global Commands
• Path-specific Commands
• Issuing a Command from the Initial Prompt
• CLI Command List
Note: The CLI uses the term "mail slot" to mean I/E station slot.
on page 498
on page 499
on page 500
on page 502
on page 503
Chapter 14
Interface
on page 499
on page 503
497