Quantum Scalar i6000 User Manual page 623

Quantum Scalar i6000 User's Guide
3 Using the file chooser dialog box, specify a path to a directory on
your remote file system in which to save the restore image. You only
need to specify the path because the MCB determines the image file
name.
4 To proceed, click Open. The library prompts you to decide whether
you want to override the current rescue image that is stored locally
on the library.
5 Click Yes.
The rescue image timestamp that appears on the Save and Restore
Library Configuration dialog box will be updated to indicate that
the file has changed.
If no rescue image exists, the library prompts you to decide if you
want to generate one.
If the save operation succeeds, a message appears that indicates the
name of the image file that was saved to the remote file system. If
the save operation does not succeed, a message appears that
describes the error that occurred.
Saving a Local Rescue Image
Use the Save Rescue command to save a library configuration rescue
image locally on the library's file system. To make sure that the image
captures all library configuration changes, you should save the image
often.
1 Log on as an administrator from the remote client or from the
library's touch screen. Click the CONFIG button on the LMC toolbar.
The Save and Restore Library Configuration dialog box appears.
Alternatively, make sure that you are viewing the physical library
(from the View menu, click the name of the physical library), then
click Tools > Save/Restore.
2 Click Save Rescue. The save rescue operation starts.
If the save rescue image operation succeeds, a message appears
that indicates that the rescue image file was saved to the library file
system. The rescue image timestamp displayed on the Save and
Restore Library Configuration dialog box will be updated to
indicate that the file has changed.
If the save rescue operation does not succeed, a message appears
that describes the error that occurred.
Chapter 15: Maintaining Your Library
Maintenance Actions
605