Configuring A Webcam For Your Library - Quantum Scalar i6000 User Manual

Chapter 3: Configuring Your Library

Configuring a Webcam For Your Library

Configuring a Webcam For Your Library
254
Note: For time limited aisle light settings, user interaction, such as
using the touch panel or opening an I/E station or aisle door,
causes the timer to reset. The lights will automatically turn on if
they are not already.
Note: The default setting is Always Off.
If desired, you can install a webcam in your library to monitor activity.
As of version 10.2, if you install a webcam in your library, the library
aisle lights turn on when the webcam is operating and then turn off
when it is stopped. In order to enable the library to control when the
aisle lights should be switched on and off in synchronization with
webcam usage, you must enter the webcam's IP address.
To enter the webcam's IP address:
1 From the main console, select Setup > System Settings > Camera
Host/IP. The Camera Host/IP dialog box appears.
2 Specify the host name or IP address of the webcam that's connected
to your intranet.
3 Click OK.
Quantum Scalar i6000 User's Guide