Quantum Scalar i6000 User Manual page 261

Quantum Scalar i6000 User's Guide
2 In the General tab, configure the following items:
• Enable LDAP:
• To enable LDAP, select Enable LDAP.
• To disable LDAP, clear the Enable LDAP check box.
Note: If you disable LDAP, single sign-on functionality will
not be available on the library.
• Server Configuration section:
• Primary: You must provide a primary IP address or DNS
name.
• Alternate: An alternate IP address or DNS name is optional.
• Secure: Use this check box to enable the setup options to
access a secure LDAP server, which can be done using any
port except 389. The default secure port is 636. If you
enable this option, you must retrieve the trusted root
Chapter 3: Configuring Your Library
Using LDAP
243