Monitoring The Library - Quantum Scalar i6000 User Manual

Chapter 15: Maintaining Your Library

Monitoring the Library

Monitoring the Library
516
• Using Library Explorer
• Drives on page 559
• Re-enable Robot Remotely
• Working With Connectivity
• Capturing Snapshots
• Updating Library Software
• Updating Drive Firmware
• Teaching the Library (Configuration and Calibration)
page 599
• Saving and Restoring Library Configuration
• Viewing the Drive Resource Utilization Reports
• Setting Up Advanced Reporting Options
• Working With Verification Tests
• Using the Partitions Defragmentation Tool
• Removing Lodged Cartridges
• Using Sift Sort on page 678
• Retrieving MIBs on page 682
• Maintaining Air Filters
• Robot, Tower and Power Rail Health Checks
The library can provide detailed information about the status of the
library and its various components. You also can access statistics about
the library and other helpful information, such as library and
component serial numbers, port numbers, World Wide Names (WWNs),
IDs, and firmware versions.
This section explains how to use Monitor menu commands to display
status information for the following general areas:
on page 553
on page 569
on page 570
on page 572
on page 579
on page 592
on page 622
on page 677
on page 683
Quantum Scalar i6000 User's Guide
on
on page 601
on page 610
on page 616
on page 674
on page 687