Quantum Scalar i6000 User Manual page 14

Preface
Mechanical Locks
Power Button on the
Library's Indicator Panel
Mercury Statement
xiv
bodily injury, damage to the equipment, or interference with other
equipment.
Caution: Be sure to read all operating instructions in this manual
and in the
Guide
before operating this product.
WARNING: Before powering on or using this equipment, read THE
System, Safety, and Regulatory Information Guide
the Guide for future reference.
Note: When drive sled positions are empty, drive cover plates must be
installed and in place at all times to prevent access into the
empty drive sled Positions.
The access and service doors can only be opened with a key. The key
should be kept by an authorized person at your company. Access to the
interior of the library is both a data-integrity and safety issue.
Switching off the Power button on the indicator panel, located on the
front of the library, removes power from the electronics, which causes
the picker to stop immediately. This button also removes power from
the drives.
WARNING: This power button functions as a power interrupt only. To
completely remove all power before servicing or in an
emergency, turn off the circuit breaker on the power
distribution unit, and then disconnect the power cord
from the electrical source.
Projectors, LCD displays, and some multifunction printers may
use lamp(s) that contain a small amount of mercury for
energy-efficient lighting purposes. Mercury lamps in these
products are labeled accordingly. Please manage the lamp
System, Safety, and Regulatory Information
Quantum Scalar i6000 User's Guide
. Keep