Quantum Scalar i6000 User Manual page 476

Chapter 13: Running Your Library
Library Management Console (LMC)
Subsystem
Robotics
Connectivity
Power
Control
Media
458
Components
Assemblies and processors involved in the movement and handling of library
media, such as the IEX board, I/E stations, the pivot and reach assemblies,
system barcode labels, doors, filters, the accessor, drive mounts, rails, towers,
and carriages
Host connectivity components, such as I/O management units, I/O blades, and
the chassis management blade (CMB)
Power supplies and related hardware, such as the power distribution unit (PDU),
power chassis, and fuses
Main processor cards and related hardware and software, such as system
firmware, the management control blade (MCB), the robotics control unit (RCU),
the library motor drive (LMD), and the operator panel
Media components such as cartridges and magazines
Each button displays a status indicator that reveals a Good, Warning,
Degraded, or Failed state as follows:
Good (green)
Warning
Degraded (yellow)
Failed (flashing red)
For example, the buttons shown in
all subsystems are functioning normally (Good), while those shown in
Figure 49 indicate that issues exist in the Media subsystem.
The library system is in working
order; no problems or issues exist.
or
There is a degraded or failed
component within this category that
requires action, but the overall
category still is functioning.
A component in this category has
failed.
Figure 48 on page 457 indicate that
Quantum Scalar i6000 User's Guide